5x205 to 4x100 conversion

Whatever you want to put in the back of your VW...
Post Reply
User avatar
Stütz
Donor
Donor
Posts: 737
Joined: Mon May 02, 2011 8:10 pm
What model do you have?: 62, 64, 71, 71
Location: Durbanville, Cape Town
Has thanked: 18 times
Been thanked: 19 times

5x205 to 4x100 conversion

Post by Stütz »

Is there an adapter (as a temporary fit) for a 5x205 to 4x100 conversion on a 1974 standard bug? Alternatively should we just modify the current hub and drums to accept the 4x100 PCD? If so, who in Cape Town does this?

We will switch to discs all 'round later (Rui) but for now an adapter or mod will do. Will be fitting 205/40x17's. I assume there will be slight clearance issues too?! This is all on a standard beam.


Decide where you stand ... then stand there!
3104
'62 Beetle (ongoing restoration)
'64 Split Panelvan (a 'one day if I retire' project)
'71 Bay Single Cab (motor built by TonyZ)
'71 Bay Double Cab (workhorse)
User avatar
Tony Z
Donor
Donor
Posts: 14999
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 487 times
South Africa

Re: 5x205 to 4x100 conversion

Post by Tony Z »

http://www.aircooledvwsa.co.za/viewtopi ... 72&t=28635

If you run a 35ET the rears will probably stick out slightly when using adapters. Fronts usually fit nicely
Say goodbye to your turning circle :hangloose:
User avatar
Stütz
Donor
Donor
Posts: 737
Joined: Mon May 02, 2011 8:10 pm
What model do you have?: 62, 64, 71, 71
Location: Durbanville, Cape Town
Has thanked: 18 times
Been thanked: 19 times

Re: 5x205 to 4x100 conversion

Post by Stütz »

Tony, I've read about the turning circle issue. Maybe a nice little Mendeola setup will fix that! :hangloose:
Decide where you stand ... then stand there!
3104
'62 Beetle (ongoing restoration)
'64 Split Panelvan (a 'one day if I retire' project)
'71 Bay Single Cab (motor built by TonyZ)
'71 Bay Double Cab (workhorse)
User avatar
Tony Z
Donor
Donor
Posts: 14999
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 487 times
South Africa

Re: 5x205 to 4x100 conversion

Post by Tony Z »

or we can start a new club... the 3-point turn club
User avatar
Stütz
Donor
Donor
Posts: 737
Joined: Mon May 02, 2011 8:10 pm
What model do you have?: 62, 64, 71, 71
Location: Durbanville, Cape Town
Has thanked: 18 times
Been thanked: 19 times

Re: 5x205 to 4x100 conversion

Post by Stütz »

Tony Z wrote:or we can start a new club... the 3-point turn club
... 'at's a LOT cheaper than going Mendeola or Red9 fo sho!
Decide where you stand ... then stand there!
3104
'62 Beetle (ongoing restoration)
'64 Split Panelvan (a 'one day if I retire' project)
'71 Bay Single Cab (motor built by TonyZ)
'71 Bay Double Cab (workhorse)
User avatar
beetle786
Camshaft
Posts: 831
Joined: Sun May 19, 2013 10:07 pm
What model do you have?: 1968 + 1303
Location: limpopo
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: 5x205 to 4x100 conversion

Post by beetle786 »

Stütz wrote:Tony, I've read about the turning circle issue. Maybe a nice little Mendeola setup will fix that! :hangloose:
hi what setup s this :oops:
Click to View . Custom Graphics for your Beetle/Bus
4029
User avatar
Tony Z
Donor
Donor
Posts: 14999
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 487 times
South Africa

Re: 5x205 to 4x100 conversion

Post by Tony Z »

fully independant and adjustable A-arm suspension
Image

Only R50k once you land it in SA. R35k if you walk into the shop
User avatar
beetle786
Camshaft
Posts: 831
Joined: Sun May 19, 2013 10:07 pm
What model do you have?: 1968 + 1303
Location: limpopo
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: 5x205 to 4x100 conversion

Post by beetle786 »

Tony Z wrote:fully independant and adjustable A-arm suspension
Image

Only R50k once you land it in SA. R35k if you walk into the shop
we got to start the 3 point turn club soooon :lol:
Click to View . Custom Graphics for your Beetle/Bus
4029
User avatar
Stütz
Donor
Donor
Posts: 737
Joined: Mon May 02, 2011 8:10 pm
What model do you have?: 62, 64, 71, 71
Location: Durbanville, Cape Town
Has thanked: 18 times
Been thanked: 19 times

Re: 5x205 to 4x100 conversion

Post by Stütz »

:lol: Classic!
Decide where you stand ... then stand there!
3104
'62 Beetle (ongoing restoration)
'64 Split Panelvan (a 'one day if I retire' project)
'71 Bay Single Cab (motor built by TonyZ)
'71 Bay Double Cab (workhorse)
Post Reply