My bug - ANGRRR - the ongoing project
- Stütz
- Donor
- Posts: 737
- Joined: Mon May 02, 2011 8:10 pm
- What model do you have?: 62, 64, 71, 71
- Location: Durbanville, Cape Town
- Has thanked: 18 times
- Been thanked: 19 times
Re: My bug - ANGRRR - the ongoing project
That's so funny because erryone that goes for a drive in that beast comes out all 'ga-ga' like. It really is rediculously fast.
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
Thanks guys, you make me blush
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- acpaterson
- Carburettor
- Posts: 1960
- Joined: Sat Jan 05, 2013 6:50 pm
- What model do you have?: Winston, a 74 Bay
- Location: Parklands, Cape Town
- Has thanked: 80 times
- Been thanked: 131 times
- Contact:
Re: My bug - ANGRRR - the ongoing project
Don't be, That's an awesome bit of engineering right there.
- vader
- ACVWSA Junkie
- Posts: 6465
- Joined: Mon Sep 19, 2005 9:17 am
- What model do you have?: TieFighter
- Location: Help!I don't know where I am. Its dark & I can hear voices...
- Has thanked: 9 times
- Been thanked: 10 times
Re: My bug - ANGRRR - the ongoing project
Suspension!! What suspension? The only suspension travel ANGRRR has, is a minimalistic movement those fat, ultra low profile tires might give.
Jan Van Riebieks Ox wagon had a smother ride over the Cape mountains than ANGRRR has over a grain of sand....
If you want comfort ride a fat seatcover...
Jan Van Riebieks Ox wagon had a smother ride over the Cape mountains than ANGRRR has over a grain of sand....
If you want comfort ride a fat seatcover...
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
- acpaterson
- Carburettor
- Posts: 1960
- Joined: Sat Jan 05, 2013 6:50 pm
- What model do you have?: Winston, a 74 Bay
- Location: Parklands, Cape Town
- Has thanked: 80 times
- Been thanked: 131 times
- Contact:
Re: My bug - ANGRRR - the ongoing project
@ Vader, ain't that the truth, but as Tony says, "it's a bit softer now than it used to be.."..
Either way, he's tight as hell, and just FARKS OFF..
Either way, he's tight as hell, and just FARKS OFF..
- vader
- ACVWSA Junkie
- Posts: 6465
- Joined: Mon Sep 19, 2005 9:17 am
- What model do you have?: TieFighter
- Location: Help!I don't know where I am. Its dark & I can hear voices...
- Has thanked: 9 times
- Been thanked: 10 times
Re: My bug - ANGRRR - the ongoing project
Yip letting air out of your tires will soften up your ride.....
I will give it to ChromeDome there is a huge amount of work that has gone into ANGRRR and it shows...
Keep up the good work...
I will give it to ChromeDome there is a huge amount of work that has gone into ANGRRR and it shows...
Keep up the good work...
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
thanks guys
It seems with my antics with Alan on Saturday I fouled out a set of spark plugs. So today I pulled them out and then spent a bit of time online researching things.
I found this comment:
At any stage of inspection if the plugs upon removal are very clean and white along the insulator nose this would indicate that the spark plugs are reaching their upper temperature threshold and as such obviously may not withstanding the temperature at full throttle.
3 of my spark plugs are very white, so I guess I have to go for yet a colder plug. I am already 2 ranges colder than stock and will now be trying a NGK D9EA.
4agedub... what plugs do you use in your 044s on the track?
While I had relatively little to do, I decided to have a look through the plug holes at the pistons and see if I have any carbon buildup.
Well, it seems my theory of running a tight deck height has worked. I dont see any carbon and can even read the Mahle emblem on the pistons.
It seems with my antics with Alan on Saturday I fouled out a set of spark plugs. So today I pulled them out and then spent a bit of time online researching things.
I found this comment:
At any stage of inspection if the plugs upon removal are very clean and white along the insulator nose this would indicate that the spark plugs are reaching their upper temperature threshold and as such obviously may not withstanding the temperature at full throttle.
3 of my spark plugs are very white, so I guess I have to go for yet a colder plug. I am already 2 ranges colder than stock and will now be trying a NGK D9EA.
4agedub... what plugs do you use in your 044s on the track?
While I had relatively little to do, I decided to have a look through the plug holes at the pistons and see if I have any carbon buildup.
Well, it seems my theory of running a tight deck height has worked. I dont see any carbon and can even read the Mahle emblem on the pistons.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- 4agedub
- Exhaust Pipe
- Posts: 1613
- Joined: Mon Sep 19, 2005 11:36 am
- What model do you have?: Bug 1970,1972, 1974
- Location: Centurion
- Has thanked: 4 times
- Been thanked: 13 times
- Contact:
Re: My bug - ANGRRR - the ongoing project
I use d9ea on the turbo engine and on the n/a engine. Be careful they do foul up pretty quick if the engine idles too rich. Previously I tried a set if 7's in the n/a engine but did find evidence of detonation with them
VW Beetle 1303 - 2165cc Turbo
VW Beetle 1971 2332cc
VW Beetle 1969 - 2666cc Turbo
VW Beetle 1974 - 1600
VW Beetle 1971 2332cc
VW Beetle 1969 - 2666cc Turbo
VW Beetle 1974 - 1600
- retrovan
- Donor
- Posts: 8709
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 539 times
- Contact:
Re: My bug - ANGRRR - the ongoing project
Hi tony,
As far as I remember, the Venturi bros, used the 9's in the number 3 piston, and used the 8's in the other three pistons.
Have you set up a temp, recorder on the cylinder heads as yet.
This may be the next step in getting your jetting where you want it.
you may be too lean on high rpm, and your plugs my be glowing by then
Maybe something like NGK 5238 R5671A-9 Racing Plug
What plug do you have 12mm or 14mm
Maybe have a look at better lineup of NGK to suit your engine, try these http://www.ngk.com/category.aspx?zcid=5 ... Span=0-30k
Good luck
Herman
As far as I remember, the Venturi bros, used the 9's in the number 3 piston, and used the 8's in the other three pistons.
Have you set up a temp, recorder on the cylinder heads as yet.
This may be the next step in getting your jetting where you want it.
you may be too lean on high rpm, and your plugs my be glowing by then
Maybe something like NGK 5238 R5671A-9 Racing Plug
What plug do you have 12mm or 14mm
Maybe have a look at better lineup of NGK to suit your engine, try these http://www.ngk.com/category.aspx?zcid=5 ... Span=0-30k
Good luck
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
The WOT jetting isnt too bad at the moment. around 4500rpm, the AFR is 13.2:1. By 5000 it is perfect at 12.5:1 and then it leans out to 13.8:1 by 5700 and then by 6400rpm she is back at 12.5:1
So it moves around a little but its not going overly lean. I am waiting for summer before I do a bit more jetting to see how the increased air temp changes things.
#3 was one of the overly white plugs. But it was #1 or #2 that was hottest. #4 looked OK to be honest.
I have 12mm plugs
The AFR at and around idle speed is a tad rich, sitting around 13:1. I'd personally like it a bit leaner than this, but it is still pretty good.
Jetting currently is 57 Idles, F11, 155 mains and 180 airs.
I will try 55 idles at some point and possibly 170 or 175 airs (which I dont have yet) to richen up the upper end a little.
So it moves around a little but its not going overly lean. I am waiting for summer before I do a bit more jetting to see how the increased air temp changes things.
#3 was one of the overly white plugs. But it was #1 or #2 that was hottest. #4 looked OK to be honest.
I have 12mm plugs
The AFR at and around idle speed is a tad rich, sitting around 13:1. I'd personally like it a bit leaner than this, but it is still pretty good.
Jetting currently is 57 Idles, F11, 155 mains and 180 airs.
I will try 55 idles at some point and possibly 170 or 175 airs (which I dont have yet) to richen up the upper end a little.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- eben
- Site Admin
- Posts: 6449
- Joined: Tue Sep 13, 2005 3:40 pm
- What model do you have?: None
- Facebook: www.facebook.com/ebenve
- Location: Fintice, Slovakia
- Has thanked: 91 times
- Been thanked: 54 times
- Contact:
Re: My bug - ANGRRR - the ongoing project
@acpaterson you definitely have a knack for telling stories...
- acpaterson
- Carburettor
- Posts: 1960
- Joined: Sat Jan 05, 2013 6:50 pm
- What model do you have?: Winston, a 74 Bay
- Location: Parklands, Cape Town
- Has thanked: 80 times
- Been thanked: 131 times
- Contact:
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
Well, another leave period at home is drawing to a close and I have nothing to report on the car.
Which is good, because it means I didnt have to work on it one bit.
I took a few people for a drive and scared them nicely (some more than others) and otherwise, I had her on the road almost every weekend while I was home. I must have done (only) about 500km, but this was 500km without worrying about the car. So I am happy.
The biggest work I did was plugging in or unplugging the battery charger and putting in fuel.
As before, the bug is an absolute riot to drive and I am loving every minute of it.
Which is good, because it means I didnt have to work on it one bit.
I took a few people for a drive and scared them nicely (some more than others) and otherwise, I had her on the road almost every weekend while I was home. I must have done (only) about 500km, but this was 500km without worrying about the car. So I am happy.
The biggest work I did was plugging in or unplugging the battery charger and putting in fuel.
As before, the bug is an absolute riot to drive and I am loving every minute of it.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
A couple of pics from the last few weeks
today
Dixon and Donovan D's visit to my place. HR left before we took photos
today
Dixon and Donovan D's visit to my place. HR left before we took photos
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: My bug - ANGRRR - the ongoing project
Have not had time to make any further progress on the car. I still need to work on the tuning, but as before, for now she is running well.
OK, until yesterday when a friend and forum lurker came to visit and the battery died on us while trying to start it.
Luckily I have another battery sitting in another project that I could scavenge.
New battery in and she fired right up without issues.
A slight warm up drive and then some chaos. 2 or 3 quick blasts up to 180plus, a few quick 0-100s and my first ever attempted wheel spin... 40m snake lines, bouncing the limiter at 7000rpm. Not bad for 215/45/17 tyres...
I dont like going "cowboy" but sometimes, it is needed.
Maybe our lurker will comment? Maybe a few pics of his awesome beetle project?
Either which way... it was great to spend a few hours speaking performance VW
OK, until yesterday when a friend and forum lurker came to visit and the battery died on us while trying to start it.
Luckily I have another battery sitting in another project that I could scavenge.
New battery in and she fired right up without issues.
A slight warm up drive and then some chaos. 2 or 3 quick blasts up to 180plus, a few quick 0-100s and my first ever attempted wheel spin... 40m snake lines, bouncing the limiter at 7000rpm. Not bad for 215/45/17 tyres...
I dont like going "cowboy" but sometimes, it is needed.
Maybe our lurker will comment? Maybe a few pics of his awesome beetle project?
Either which way... it was great to spend a few hours speaking performance VW
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!