75 Fleetline Single Cab
- jolas
- Donor
- Posts: 4253
- Joined: Fri Jul 16, 2010 10:11 am
- What model do you have?: '65 Kombi
- Location: Klapmuts, Western Cape
- Has thanked: 393 times
- Been thanked: 173 times
Re: 75 Fleetline Single Cab
Some pics of the night before the trip to the sandblaster early the next morning. Starting off with Sean cutting off the lower nose section that initially looked ok
Leaving with his single cab to the sand blaster at sun up so that I could be first in the queue, a most bleak and depressing working environment - truly - cannot think of a more terrible job and/or place to work
Spent the whole damned day there. Ugh !
Unloaded the pick-up that evening, we decided to it would be a wasted opportunity to return the hired trailer without having sandblasted my pick-up, so we loaded my single cab onto the trailer later that night. Sean started to apply primer and carried on into the wee hours of the morning while I carried on cutting out my floor rusted floor sections, etc.
Leaving with his single cab to the sand blaster at sun up so that I could be first in the queue, a most bleak and depressing working environment - truly - cannot think of a more terrible job and/or place to work
Spent the whole damned day there. Ugh !
Unloaded the pick-up that evening, we decided to it would be a wasted opportunity to return the hired trailer without having sandblasted my pick-up, so we loaded my single cab onto the trailer later that night. Sean started to apply primer and carried on into the wee hours of the morning while I carried on cutting out my floor rusted floor sections, etc.
You do not have the required permissions to view the files attached to this post.
by fig » Mar 26, 2018
Sambas in South Africa are good for only 2 things: showing off and sunburn.
Sambas in South Africa are good for only 2 things: showing off and sunburn.
- retrovan
- Donor
- Posts: 8709
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 539 times
- Contact:
Re: 75 Fleetline Single Cab
Sean, now that you have cut out so much, she still looks solid, thought she would have been very rotten under the skin.
Nice work, see you using a lot of original parts ??
thanks for the inspiration
Herman
Nice work, see you using a lot of original parts ??
thanks for the inspiration
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
This is just an update for acpaterson....
Perhaps you would like to see a real lemon of a VW.
Some more replacement panels have arrived.
The fitment has started. These outer panels are made by Autocraft. I cant really fault these panels either. They have needed slight trimming here and there but otherwise all fitted well. Maybe more to do with that its fitted to a Fleetline than the panels themselves.
Lining up the long side to be welded in.
Started welding in the short side and outer valance under the treasure chest.
Bettery tray test fitted. Ready to be welded in.
Spray painting the panels on the inside with the epoxy based paint to hopefully prevent any rust from starting from the inside again.
New inner rockers and outriggers welded into place. Luckily all jacking points are still in good condition. I was able to grind and file out all the old remains of the old outriggers and simply slide in the new ones.
Perhaps you would like to see a real lemon of a VW.
Some more replacement panels have arrived.
The fitment has started. These outer panels are made by Autocraft. I cant really fault these panels either. They have needed slight trimming here and there but otherwise all fitted well. Maybe more to do with that its fitted to a Fleetline than the panels themselves.
Lining up the long side to be welded in.
Started welding in the short side and outer valance under the treasure chest.
Bettery tray test fitted. Ready to be welded in.
Spray painting the panels on the inside with the epoxy based paint to hopefully prevent any rust from starting from the inside again.
New inner rockers and outriggers welded into place. Luckily all jacking points are still in good condition. I was able to grind and file out all the old remains of the old outriggers and simply slide in the new ones.
Last edited by sean on Tue Jan 24, 2017 10:50 pm, edited 1 time in total.
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
The cab is nearing completion. I have welded the lower nose section in already and filled/flatted where necessary.
I have used a high solid primer which I have found to cover very nicely as well as sand down nicely too.
I have used a high solid primer which I have found to cover very nicely as well as sand down nicely too.
Last edited by sean on Tue Jan 24, 2017 10:52 pm, edited 1 time in total.
- splitbusahollic
- Advertiser
- Posts: 1265
- Joined: Tue Sep 07, 2010 7:10 pm
- What model do you have?: a couple of buses
- Facebook: vintage kombi
- Location: Port Elizabeth
- Has thanked: 87 times
- Been thanked: 54 times
- Contact:
Re: 75 Fleetline Single Cab
Looking Great Sean !
glad those panels fitted well !
glad those panels fitted well !
vintage kombi.co.za (Website)
vintage kombi on Facebook
vintage kombi on Facebook
- jolas
- Donor
- Posts: 4253
- Joined: Fri Jul 16, 2010 10:11 am
- What model do you have?: '65 Kombi
- Location: Klapmuts, Western Cape
- Has thanked: 393 times
- Been thanked: 173 times
Re: 75 Fleetline Single Cab
eish I'm getting left behind here
good progress man !
good progress man !
by fig » Mar 26, 2018
Sambas in South Africa are good for only 2 things: showing off and sunburn.
Sambas in South Africa are good for only 2 things: showing off and sunburn.
- riaanj
- Exhaust Pipe
- Posts: 1665
- Joined: Wed Oct 06, 2010 8:17 pm
- What model do you have?: None ATM, oneday...
- Location: Germiston
- Has thanked: 6 times
- Been thanked: 41 times
Re: 75 Fleetline Single Cab
Looking good there..
Just keep on BUGGIN'
Protect the endangered, say NO to exporting our AirCooled spares & cars..
T6 Ranger 2.2TDCi D/Cab
307E Anglia panel-van
Honda CBR600RR
Honda CBR600F4
Honda CBR1100XX SuperBlackbird
Protect the endangered, say NO to exporting our AirCooled spares & cars..
T6 Ranger 2.2TDCi D/Cab
307E Anglia panel-van
Honda CBR600RR
Honda CBR600F4
Honda CBR1100XX SuperBlackbird
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
Work has been continuing over the last while. It certainly is quite a process before you start seeing results. Between work and travelling a fair bit lately I have managed to still get some work done.
My goal was to be finished in the middle of the year, but its seeming a little strenuous now. Guaranteed it will make the George 2015 car show.
Some work on the rear hinge carier.
Still need to repair a missing piece.
New floor section being installed.
This floor will soon be going on, but first I must completely finish the inside including spraying the final coat. It’s just too hideous to spray inside there in such a confined space.
My goal was to be finished in the middle of the year, but its seeming a little strenuous now. Guaranteed it will make the George 2015 car show.
Some work on the rear hinge carier.
Still need to repair a missing piece.
New floor section being installed.
This floor will soon be going on, but first I must completely finish the inside including spraying the final coat. It’s just too hideous to spray inside there in such a confined space.
Last edited by sean on Tue Jan 24, 2017 10:51 pm, edited 1 time in total.
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
Long side prepped for epoxy primer. After the repair panels were welded in, I sanded down the side completely that had not been sandblasted for fear of warping. I might has well of sandblasted because it was rusted and warped anyway. That paint could not have stayed, although it looked fine with some very fine spider web looking imperfections, the sanding revealed it was actually rust development. Most probably started from a stone chip kind of thing.
Treasure chest outer rocker fitted and sprayed.
B-pillars installed and primered.
Issues with installing the drivers side B-pillar. These guy’s at Autocraft got something very wrong here. This part was actually back to front and the treasure chest outer rocker wasn’t correct either. They were never made to fit. After some modifying and tinkering, I got them to fit. In this case the Gerson panels fitted perfectly on my 59.
Treasure chest outer rocker fitted and sprayed.
B-pillars installed and primered.
Issues with installing the drivers side B-pillar. These guy’s at Autocraft got something very wrong here. This part was actually back to front and the treasure chest outer rocker wasn’t correct either. They were never made to fit. After some modifying and tinkering, I got them to fit. In this case the Gerson panels fitted perfectly on my 59.
Last edited by sean on Tue Jan 24, 2017 10:53 pm, edited 1 time in total.
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
After all the sanding and flatting, I have applied the second coat of HS primer. I am quite happy with the results so far.
Long side looking nice and straight.
Treasure chest door fitted to check for alignment.
Cab nearing completion with doors fitted to also check for alignment.
This is the worst part over, preparing for final coat will be easy.
BUT, I still have to do the wide load bed, not looking forward to that.
Long side looking nice and straight.
Treasure chest door fitted to check for alignment.
Cab nearing completion with doors fitted to also check for alignment.
This is the worst part over, preparing for final coat will be easy.
BUT, I still have to do the wide load bed, not looking forward to that.
Last edited by sean on Tue Jan 24, 2017 10:54 pm, edited 1 time in total.
- Cyndi Kritzinger
- Donor
- Posts: 1290
- Joined: Wed Apr 24, 2013 3:49 pm
- What model do you have?: '76 BRAZILIA '78 BAY
- Facebook: yes
- Location: DURBAN
- Been thanked: 64 times
Re: 75 Fleetline Single Cab
COMING ALONG NICELY SEAN.
AS HERMAN SAYS, IT'S GOOD MOTIVATION FOR OTHERS. ALSO NICE TO SEE THAT MATES ARE HELPING OUT.
MIGHT BE A WHOLE NEW CROWD OF SPLITTY'S AT THE 2015 GEORGE MOTOR SHOW!
AS HERMAN SAYS, IT'S GOOD MOTIVATION FOR OTHERS. ALSO NICE TO SEE THAT MATES ARE HELPING OUT.
MIGHT BE A WHOLE NEW CROWD OF SPLITTY'S AT THE 2015 GEORGE MOTOR SHOW!
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: 75 Fleetline Single Cab
Well, if you can get that single cab ready, you going to fit right in. Paul and myself are trying to focus next years show on pick-up's. This includes single and double cabs, splits and bay's.Cyndi Kritzinger wrote:COMING ALONG NICELY SEAN.
AS HERMAN SAYS, IT'S GOOD MOTIVATION FOR OTHERS. ALSO NICE TO SEE THAT MATES ARE HELPING OUT.
MIGHT BE A WHOLE NEW CROWD OF SPLITTY'S AT THE 2015 GEORGE MOTOR SHOW!
Will be great if you can make it.
- stew 89
- Oil Cooler
- Posts: 302
- Joined: Thu Oct 09, 2008 4:20 pm
- What model do you have?: kombi
- Location: Durban
- Has thanked: 12 times
- Been thanked: 10 times
Re: 75 Fleetline Single Cab
Nice work Sean... Keep op the good work. what ever happened to your splitty with the bunny ears?
any thing easy probably isn't worth doing.