The plug issue ! Hot versus Cold

Ask and give advice here
Post Reply
Haans
Camshaft
Posts: 893
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

The plug issue ! Hot versus Cold

Post by Haans »

from what I understand now,......the range of the plug does not reduce engine temp,......??
You can use a colder / hotter plug to reduce plug temp ? In order to controll the temp of the plug to ensure "decent" combustion ?

Is this about right ?

Haans


User avatar
retrovan
Donor
Donor
Posts: 8709
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 539 times
Contact:
Netherlands

Re: The plug issue ! Hot versus Cold

Post by retrovan »

Yes to a point.

The combustion is not effected by the hot and cold due to spark intensity.

The spark plug has a perfect working temp. and that is why most manufacturers specify mid range.

The most have mid-range at 5 or 6 and go hotter up scale to 7 and 8

NGK, is the only one I know that goes the other way, and 7 is colder and 4 is hotter.

The more off standard you engine is the colder you should go with your plug, as this will allow the plug to cool faster between fires, and in this way prevent per-ignition.

So the hotter the combustion, the colder the plug, and the more colder the engine, (low octain) the hotter the plug.

VW beetle engines normally use a 6 NGK, but if you run twin carbs, you should go for the 7 plugs, if more mods, then the risistor (R)series and a number 8

I run the R7 NGK series with great results. thats because I have twin carbs and light modified engine.

You can change the spark plugs to NGK BP7HS or NGK BPR7HS

Herman
Last edited by retrovan on Wed Jun 27, 2018 10:02 am, edited 1 time in total.
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Tony Z »

Haans, do yourself a favour and go to the NGK website. They have a lot of info there and you should get your answers.
Then you can update this post and share your findings ;-)
Haans
Camshaft
Posts: 893
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Haans »

Thanks gents,...will do that and see if it makes sense

Haans
User avatar
retrovan
Donor
Donor
Posts: 8709
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 539 times
Contact:
Netherlands

Re: The plug issue ! Hot versus Cold

Post by retrovan »

Here you go, from a technical sheet..

..............In most cases, it is not until the engine is modified, or the compression is raised significantly, that stock ignition systems and spark plugs begin to show signs of being inadequate. At this point, a variety of factors determine which spark plug will be best suited for a particular configuration. In these modified engines, specific electrode/tip combinations, electrode materials and colder heat ranges can provide measurable gains in power. If your vehicle has had extensive modifications, it would be best to seek the advice of the manufacturer of your vehicle, the aftermarket supplier who manufactured your modifications, or your mechanic............

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
Haans
Camshaft
Posts: 893
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Haans »

All,...am currently embarking on a "Masters"in plug understanding !!!!!😏 Some of it is still "greek" to me but i've got time onmy side,........I hope

But in the mean time enjoy this with me,......will definately go for the 7's plug for the 1641,....and probably go for a hotter "5" for the TP in the '70 single cab asit is running short distances.

Image

Image

Image

Image

Image
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Tony Z »

Haans wrote: Thu Jun 28, 2018 4:38 pm All,...am currently embarking on a "Masters"in plug understanding !!!!!😏 Some of it is still "greek" to me but i've got time onmy side,........I hope

But in the mean time enjoy this with me,......will definately go for the 7's plug for the 1641,....and probably go for a hotter "5" for the TP in the '70 single cab asit is running short distances.
keep it stock.
A 1641 doesnt need 7's. I run stock 6's in my 2110 pushing my bus and it runs perfectly.
User avatar
slak
Donor
Donor
Posts: 1027
Joined: Wed Jul 14, 2010 11:07 am
What model do you have?: Baja, Bay , Beetle
Facebook: http://www.facebook.com/editprofile.php
Location: Jhb , Germiston
Has thanked: 7 times
Been thanked: 32 times

Re: The plug issue ! Hot versus Cold

Post by slak »

1600 Stock non modified engine original plugs were

Bosch W8AC
Champion L87Y
NGK B5HS

so The B = 14mm thread with 20.8mm hexagon
The 5 = heat rating
The H = 12.7mm reach
The S = Standard type end construction
U Only Live Once Right !!!
Terry Phillips
Fuel Injection
Posts: 2005
Joined: Mon Jul 16, 2012 5:56 pm
What model do you have?: T3,1beetle
Location: Kempton Park
Has thanked: 193 times
Been thanked: 121 times
Zambia

Re: The plug issue ! Hot versus Cold

Post by Terry Phillips »

The wrong plug heat range can burn holes in the piston.
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Tony Z »

Terry Phillips wrote: Fri Jun 29, 2018 11:20 am The wrong plug heat range can burn holes in the piston.
thats from the plug being too hot and causing detonation.
A plug thats too cold will foul up and not spark anymore.
Haans
Camshaft
Posts: 893
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Haans »

Yip,.....we are on the same page,....
Reasoning for the "hotter" plug on the single cab is it has fouled up a plug or 2 already,....... if it does it again ,.....I will chance it with a "5" and drive it for a week or two,...then check the condition of plugs

Thank you all,......your responses is exactly why I joined this forum,"..............get informed education,..then decide on action.
If you foul up,....then you did'nt listen well!!!!

Haans
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Tony Z »

now to add confusion, there is another means of tuning the plug heat range. I havent found much info on it but in all honesty, I need to look into it again.
This involves driving at wide open throttle and then cutting off all spark and fuel and pulling out the plugs to see where their "temperature line" is. If this line is close to the tip, the plug is too cold, if it is too close to the threads, then its too hot. It is supposed to be somewhere in the middle, but I am not sure exactly where.

Image

Image

Those pics came off Angrrr after I destroyed the gearbox when flatout in 4th around 4500rpm
And yes, I am still unsure of exactly which plug I need to use in that engine - I'm on NGK 8s at the moment. If they foul up again, I'll try 8P's before going to 7s
User avatar
retrovan
Donor
Donor
Posts: 8709
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 539 times
Contact:
Netherlands

Re: The plug issue ! Hot versus Cold

Post by retrovan »

Haans,

Do what I do, fit the plugs you think are right, drive at your normal top speed for 20 Km, and pull into a Hiway Quick stop, have lunch while the car cools down, Take out the plugs and see what they like, then decide if you need to go colder or hotter. (do not take vw plugs out when hot, you can damage the threads) Repeat till you happy, rather cold plugs then hot, because cold only fouls up, hot can burn pistons

OMO

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
Haans
Camshaft
Posts: 893
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

Re: The plug issue ! Hot versus Cold

Post by Haans »

Herman,....makes sense ,.......

Bay had 7' in previously,......can't quite remember whats in now? Will check tomorrow or this afternoon when cold

Haans
Post Reply