How to build that perfect Bug

Ask and give advice here
User avatar
IMPI
Donor
Donor
Posts: 1896
Joined: Wed Sep 14, 2005 9:01 pm
What model do you have?: sp2
Location: Orkney Northwest province
Has thanked: 1 time
Been thanked: 78 times

How to build that perfect Bug

Post by IMPI »

The secret to having a successfull project can be summed up in one word: Planning.
You must decide on what it is that you want to achieve. Make a list.
Most projects have 2 major components.
The first is the base project. Remember the newest Bug is now 30 years old and a lot of stock parts will need replacing.
This does nothing for the looks or performance of the car (probably a lot with safety and reliability)
I believe that if you stick to the following list you will have a reasonable chance for success.
Body: Buy the best most rust free body you could find preferably one with no mods unless those are what you had in mind (plan)
Front suspension: Plan on replacing King and linkpins,steering damper, tie rod ends, wheel bearings, brake cylinders, Brake shoes, shock absorbers, brake hoses, steering box, steering box coupler.
Rear suspension: Plan on replacing axle tube rubber gaitors, Shock absorbers, brake hoses, Wheel cylinders, Brake shoes, rear axle seal kits, Hand brake cablesand possibly torsion bar doughnuts.
Gearbox: engine mountings, clutch cable, Bowden tube, clutch throw out shaft, shift coupler, starter bushing,oil seal at input shaft.
Chassis shift bushing at gearlever, master cylinder, clutchtube inside chassis, floorpan rust or collision damage, throttle pedal and mounts(the brazillian copies are crap) clutch cable hook on pedal assembly(they break)
Electrical system plan on replacing alternator bearings and brushes, starter bushes and brushes, solenoid, bendix drive, refurbish wiper pivots and motor. repair wiring using the correct colour wires and lugs DO NOT ALLOW OVERSPRAY ON ELECTRICAL PARTS. Do not fit add on switches for Wipers,flickers,ignition, headlights etc.
Upholstery be sure that if you fit other seats that they rplicate the original seat height otherwise the car never feels right.
The engine and any modifications intended for performance can now start. Lowering: only adjusters Cutting or removing leaves are dangerous.
Discbrakes follow the braking rules (only use top notch or new parts) I never rebuild brake components new ones are inexpensive enough same with hoses REPLACE THEM.
Plan your engine: a mild engine is often greater fun but if you insist First step Performance exhaust,second Twin carbs and dizzy third step bigger bores and crank. fourth step heads and cam. obviously other restoration type parts such as fuel pump and coil should be in good condition. The second step will already overtax the stock braking system.
I have found it more economical in the long run to do about 90% of these things in every restoration and have had great times with very few breakdowns
Armand


Image
Who cares how it's done in California? :twisted:
(018) 473-0186
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: How to build that perfect Bug

Post by Tony Z »

STICKY please Eben
calooker
Donor
Donor
Posts: 4973
Joined: Wed Sep 14, 2005 9:24 am
What model do you have?: 77 SP
Location: Johannesburg
Has thanked: 4 times
Been thanked: 98 times
Contact:

Re: How to build that perfect Bug

Post by calooker »

And one important thing, MONEY, make sure you have it before you start, doomed to fail if finances run dry.
For what it's worth, ignorance has no limits ......
User avatar
66looker
Oil Stain
Posts: 124
Joined: Mon Jun 30, 2008 8:04 pm
What model do you have?: 1966 bug
Location: johannesburg

Re: How to build that perfect Bug

Post by 66looker »

good advice :hangloose: thanks impi
'HE WHO KEEPITH HIS MOUTH KEEPITH HIS LIFE'
User avatar
superfly
Oil Stain
Posts: 182
Joined: Tue Jun 26, 2007 10:17 pm
What model do you have?: 60 KG
Location: Durban

Re: How to build that perfect Bug

Post by superfly »

what would you advise on a body of a project car , paint remover or sandblasting ? ..
User avatar
superfly
Oil Stain
Posts: 182
Joined: Tue Jun 26, 2007 10:17 pm
What model do you have?: 60 KG
Location: Durban

Re: How to build that perfect Bug

Post by superfly »

on a Karmann ghia that is.
User avatar
vader
ACVWSA Junkie
Posts: 6465
Joined: Mon Sep 19, 2005 9:17 am
What model do you have?: TieFighter
Location: Help!I don't know where I am. Its dark & I can hear voices...
Has thanked: 9 times
Been thanked: 10 times

Re: How to build that perfect Bug

Post by vader »

Very sticky!!! Good on you Impi!
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
User avatar
IMPI
Donor
Donor
Posts: 1896
Joined: Wed Sep 14, 2005 9:01 pm
What model do you have?: sp2
Location: Orkney Northwest province
Has thanked: 1 time
Been thanked: 78 times

Re: How to build that perfect Bug

Post by IMPI »

On a karmann with lots of lead loaded seams I have used chemicals with great success. Karmann metal was hand formed and welded of a much thinner metal than beetles and careless sandblasting will warp the body
Armand
Image
Who cares how it's done in California? :twisted:
(018) 473-0186
User avatar
IMPI
Donor
Donor
Posts: 1896
Joined: Wed Sep 14, 2005 9:01 pm
What model do you have?: sp2
Location: Orkney Northwest province
Has thanked: 1 time
Been thanked: 78 times

Re: How to build that perfect Bug

Post by IMPI »

On a karmann with lots of lead loaded seams I have used chemicals with great success. Karmann metal was hand formed and welded of a much thinner metal than beetles and careless sandblasting will warp the body
Armand
Image
Who cares how it's done in California? :twisted:
(018) 473-0186
User avatar
zubz
Valve
Posts: 1080
Joined: Wed Apr 01, 2009 10:03 am
What model do you have?: 62 LHD Rag, 69 Auto
Location: Johannesburg

Re: How to build that perfect Bug

Post by zubz »

Hi Impi, excellent article especially for beginners like myself. Tell me where can one get adjusters and how much would it cost to lower the beetle? Somebody said normally they remove leaves, but as you say this is dangerous... Tx
Image
User avatar
Ron&Gill
Full-time Bug Nutter
Posts: 4054
Joined: Fri Aug 29, 2008 4:16 am
What model do you have?: Type 1, 21b, 34, 316
Location: St Lucia KZN/Cameron LA
Has thanked: 1 time
Been thanked: 21 times
Netherlands

Re: How to build that perfect Bug

Post by Ron&Gill »

IMPI, very good post. I have cut and pasted it into a word doc for my to-do list on the Mini-T, there are a lot of reminders there that I had forgotten about.

Thanks for that.
1964 T34 - The Razor: viewtopic.php?f=23&t=10290
1956 T2 1b - Gill's bus: viewtopic.php?f=23&t=10948
1967 T316 - viewtopic.php?f=23&t=10931 & viewtopic.php?f=23&t=15977
2000 beach buggy - viewtopic.php?f=23&t=10915
User avatar
vader
ACVWSA Junkie
Posts: 6465
Joined: Mon Sep 19, 2005 9:17 am
What model do you have?: TieFighter
Location: Help!I don't know where I am. Its dark & I can hear voices...
Has thanked: 9 times
Been thanked: 10 times

Re: How to build that perfect Bug

Post by vader »

Ditto!!!! :hangloose: :flash: :twisted: :drunks: :drunks:
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
User avatar
johanb
Flywheel
Posts: 566
Joined: Fri Nov 21, 2008 8:34 am
What model do you have?: '64 Bus
Location: St Henenabay
Has thanked: 1 time
Been thanked: 3 times
South Africa

Re: How to build that perfect Bug

Post by johanb »

Thanks Impi

Just decided that I will impliment this advise on my bus rebuild :D
User avatar
Farhaad
Fuel Injection
Posts: 2114
Joined: Sat Jun 27, 2009 10:52 pm
What model do you have?: memories
Location: cape town
Been thanked: 2 times

Re: How to build that perfect Bug

Post by Farhaad »

hi,impi
great advice. will use them on my ol "66 :hangloose:
Kwantum
Drip
Posts: 9
Joined: Mon Jul 13, 2009 4:11 am
What model do you have?: 1953 Beetle
Location: Arizona, USA

Re: How to build that perfect Bug

Post by Kwantum »

calooker wrote:And one important thing, MONEY, make sure you have it before you start, doomed to fail if finances run dry.
QFT. Money, planning, and ability check. Many people think that bugs are a cool project car because they are cheap to get started on. Unfortunately, this low-cost mentality bleeds over from the purchase price into the cost of restoring. While bugs can be less expensive to restore compared to almost all other cars, it still costs a heap. For every one completed project, there are a couple dozen uncompleted one.

1) Look at the car and make a list of EVERYTHING. Nuts, bolts, rubber, etc. Every penny counts. Don't forget shipping and tax costs too.
2) If the car needs something done to it, and you are iffy on the particulars of doing said thing, add that too.
3) After you add up all the costs, add another 10%. This is the more accurate number
4) Once you figure out how much it will cost, figure out how long it will take you to get the money and the work done. A realistic number here is about 2-3 years.
5) After you add up all the time, multiply it times 2. This is how long it will probably take.

To think anything other than what I have listed will compromise some facet of your project. You'll either drive an unsafe car, an incomplete car, or a car you really aren't completely happy with.

In summation, your project will cost $15000 USD and take 5 years to complete. :drunks:
Post Reply