AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Get your parts here
Forum rules
Post only parts for sale here, no vehicles.
Post Reply
GT!
Drip
Posts: 32
Joined: Mon Nov 21, 2011 9:24 pm
What model do you have?: DOKA
Location: Westrand
South Africa

AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by GT! »

Hi there.

I purchased a Doka that was an abandoned project by the previous owner.
He had a VR6 motor installed together with Flywheel and adaptor for a WBX 4 speed box.
I decided on a different route engine wise for this project and would like to sell the VR6 engine, Adaptor plate and Flywheel.

Looking at 15K negotiable for the lot.

The engine is still in the Doka in a shop in Florida in Roodepoort.

You can contact me on o83 928 7oo2 if interested.
I can send pics to interested parties.
Thanks for reading. :)


GT!
Drip
Posts: 32
Joined: Mon Nov 21, 2011 9:24 pm
What model do you have?: DOKA
Location: Westrand
South Africa

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by GT! »

64 views and not a single response :-(
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 191 times
Been thanked: 487 times
South Africa

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by Tony Z »

maybe that because people want to see what the post is about but not interested in buying a VR6 engine.
GT!
Drip
Posts: 32
Joined: Mon Nov 21, 2011 9:24 pm
What model do you have?: DOKA
Location: Westrand
South Africa

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by GT! »

Maybe... Thanks for the response Tony Z :-) at least i have one.
Just to clear things up. This is a non running set up. Engine was just mounted and the Flywheel and adaptor done.
Oh and Doka not included :-)
User avatar
retrovan
Donor
Donor
Posts: 8709
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 539 times
Contact:
Netherlands

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by retrovan »

As most guys here are into converting back to aircooled, and taking out the water cooled conversions, You will be better off on a FORD forum, as that's where the interest will be.

OMO

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
GT!
Drip
Posts: 32
Joined: Mon Nov 21, 2011 9:24 pm
What model do you have?: DOKA
Location: Westrand
South Africa

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by GT! »

Thanks for your advice Herman. Much appreciated as i see you're a long standing member of this Forum.
You sure that a FORD forum would be the best place to advertise a VW Golf VR6 engine, with adaptor plate and flywheel for a Kombi gearbox?
Hmmmnnn... I'm not so sure.
73type2
Pushrod
Posts: 987
Joined: Fri Apr 21, 2017 11:37 am
What model do you have?: '73 T2 Single Cab
Location: Cape Town
Has thanked: 141 times
Been thanked: 100 times
France

Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate

Post by 73type2 »

Don't feel too bad GT! This site has been VERY quiet the last couple of months. Before, even non air cooled stuff was commented on. More people need to post in order to keep this site interesting, otherwise it is dying a slow death.
Post Reply