Hi there.
I purchased a Doka that was an abandoned project by the previous owner.
He had a VR6 motor installed together with Flywheel and adaptor for a WBX 4 speed box.
I decided on a different route engine wise for this project and would like to sell the VR6 engine, Adaptor plate and Flywheel.
Looking at 15K negotiable for the lot.
The engine is still in the Doka in a shop in Florida in Roodepoort.
You can contact me on o83 928 7oo2 if interested.
I can send pics to interested parties.
Thanks for reading.
AAA VR6 Motor from Importer/Flywheel/Adaptor plate
Forum rules
Post only parts for sale here, no vehicles.
Post only parts for sale here, no vehicles.
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 191 times
- Been thanked: 487 times
Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate
maybe that because people want to see what the post is about but not interested in buying a VR6 engine.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
-
- Drip
- Posts: 32
- Joined: Mon Nov 21, 2011 9:24 pm
- What model do you have?: DOKA
- Location: Westrand
Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate
Maybe... Thanks for the response Tony Z at least i have one.
Just to clear things up. This is a non running set up. Engine was just mounted and the Flywheel and adaptor done.
Oh and Doka not included
Just to clear things up. This is a non running set up. Engine was just mounted and the Flywheel and adaptor done.
Oh and Doka not included
- retrovan
- Donor
- Posts: 8709
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 539 times
- Contact:
Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate
As most guys here are into converting back to aircooled, and taking out the water cooled conversions, You will be better off on a FORD forum, as that's where the interest will be.
OMO
Herman
OMO
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
-
- Drip
- Posts: 32
- Joined: Mon Nov 21, 2011 9:24 pm
- What model do you have?: DOKA
- Location: Westrand
Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate
Thanks for your advice Herman. Much appreciated as i see you're a long standing member of this Forum.
You sure that a FORD forum would be the best place to advertise a VW Golf VR6 engine, with adaptor plate and flywheel for a Kombi gearbox?
Hmmmnnn... I'm not so sure.
You sure that a FORD forum would be the best place to advertise a VW Golf VR6 engine, with adaptor plate and flywheel for a Kombi gearbox?
Hmmmnnn... I'm not so sure.
-
- Pushrod
- Posts: 987
- Joined: Fri Apr 21, 2017 11:37 am
- What model do you have?: '73 T2 Single Cab
- Location: Cape Town
- Has thanked: 141 times
- Been thanked: 100 times
Re: AAA VR6 Motor from Importer/Flywheel/Adaptor plate
Don't feel too bad GT! This site has been VERY quiet the last couple of months. Before, even non air cooled stuff was commented on. More people need to post in order to keep this site interesting, otherwise it is dying a slow death.