bent fuel pump rod??have i @#$%@ up
-
- Oil Stain
- Posts: 116
- Joined: Mon Aug 29, 2016 11:18 am
- What model do you have?: 69 vw beetle
- Location: port shepstone
- Has thanked: 1 time
- Been thanked: 5 times
bent fuel pump rod??have i @#$%@ up
Ok so got clever and decided to clean up the motor
of chelseys bug.
stripped off oil cooler took fuel pump off dizzy off
Tried to turn motor bent the fuel pump rod managed to get it out.
But the motor will not turn more than 30 degrees then stops WHAT HAVE I DONE
How can i fix it without splitting the whole motor.
Any help would be appreciated.
Thanks
of chelseys bug.
stripped off oil cooler took fuel pump off dizzy off
Tried to turn motor bent the fuel pump rod managed to get it out.
But the motor will not turn more than 30 degrees then stops WHAT HAVE I DONE
How can i fix it without splitting the whole motor.
Any help would be appreciated.
Thanks
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: bent fuel pump rod??have i @#$%@ up
You might find that the dizzy timing gear has come out. Try jiggle it back in with a screwdriver
If you need to get it out and cant using your tools, get a wooden dowel rod and ram it into the gear hole - you should now be able to pull it out.
Beware though, there is a washer between the gear and the case. DO NOT let this drop into the casing. And remember that it needs to be refitted before putting the gear back it - put a dap of grease on the bottom of the gear and push the washer into this grease.
If you need to get it out and cant using your tools, get a wooden dowel rod and ram it into the gear hole - you should now be able to pull it out.
Beware though, there is a washer between the gear and the case. DO NOT let this drop into the casing. And remember that it needs to be refitted before putting the gear back it - put a dap of grease on the bottom of the gear and push the washer into this grease.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
-
- Donor
- Posts: 4973
- Joined: Wed Sep 14, 2005 9:24 am
- What model do you have?: 77 SP
- Location: Johannesburg
- Has thanked: 4 times
- Been thanked: 98 times
- Contact:
Re: bent fuel pump rod??have i @#$%@ up
I have the right tool for the dizzy drive gear removal.
Rui 082 830 6493
Rui 082 830 6493
For what it's worth, ignorance has no limits ......
- IMPI
- Donor
- Posts: 1896
- Joined: Wed Sep 14, 2005 9:01 pm
- What model do you have?: sp2
- Location: Orkney Northwest province
- Has thanked: 1 time
- Been thanked: 78 times
Re: bent fuel pump rod??have i @#$%@ up
The problem is the shim washers they are now stuck to the shaft and possibly bent push the drive down as far as it will go gently rotating it once it seats at the bottom you will need to tap it lightly to flatten the shim washers then gently pull the drive up and rotate until it comes out. You will probably find lots of brass shavings which mean a destroyed timing gear. This can only be fixed by stripping the crank case and replacing it
Who cares how it's done in California?
(018) 473-0186
-
- Oil Stain
- Posts: 116
- Joined: Mon Aug 29, 2016 11:18 am
- What model do you have?: 69 vw beetle
- Location: port shepstone
- Has thanked: 1 time
- Been thanked: 5 times
Re: bent fuel pump rod??have i @#$%@ up
I will give that a bash tonight
i have tried to remove the piece of Bakelite as well
with no success.
i have tried to remove the piece of Bakelite as well
with no success.
-
- Oil Stain
- Posts: 116
- Joined: Mon Aug 29, 2016 11:18 am
- What model do you have?: 69 vw beetle
- Location: port shepstone
- Has thanked: 1 time
- Been thanked: 5 times
Re: bent fuel pump rod??have i @#$%@ up
ok i think i have found my problem.
when the shaft bent it broke the bottom section of the Bakelite.
This has now dropped down into the gears on the crank.
when the shaft bent it broke the bottom section of the Bakelite.
This has now dropped down into the gears on the crank.
-
- Oil Stain
- Posts: 116
- Joined: Mon Aug 29, 2016 11:18 am
- What model do you have?: 69 vw beetle
- Location: port shepstone
- Has thanked: 1 time
- Been thanked: 5 times
Re: bent fuel pump rod??have i @#$%@ up
OK f#Ck IT
IM GOING TO SPLIT THE BITCH
AND JUST DO A FULL REBUILD ANY ONE WITH SOME OVERSIZE PISTONS AND
BARRELS AVAILABLE FOR A GOOD PRICE.
IM GOING TO SPLIT THE BITCH
AND JUST DO A FULL REBUILD ANY ONE WITH SOME OVERSIZE PISTONS AND
BARRELS AVAILABLE FOR A GOOD PRICE.
- buggyfan
- Long Block
- Posts: 2979
- Joined: Wed Mar 12, 2008 2:26 am
- What model do you have?: lwb beachbuggy
- Location: newlands,jhb
- Has thanked: 95 times
- Been thanked: 87 times
Re: bent fuel pump rod??have i @#$%@ up
Contact @merlin ,he had p&c's for sale a while backmcg wrote:OK f#Ck IT
IM GOING TO SPLIT THE BITCH
AND JUST DO A FULL REBUILD ANY ONE WITH SOME OVERSIZE PISTONS AND
BARRELS AVAILABLE FOR A GOOD PRICE.
viewtopic.php?f=72&t=33548
http://www.aircooledvwsa.co.za/viewtopi ... tt#p269451" onclick="window.open(this.href);return false;
- Merlin
- ACVWSA Junkie
- Posts: 6116
- Joined: Tue Sep 20, 2005 8:46 pm
- What model do you have?: Various
- Location: Cape Town, ZA
- Has thanked: 20 times
- Been thanked: 39 times
- Contact:
Re: bent fuel pump rod??have i @#$%@ up
Thanks @buggyfan. They have all been sold.buggyfan wrote:Contact @merlin ,he had p&c's for sale a while backmcg wrote:OK f#Ck IT
IM GOING TO SPLIT THE BITCH
AND JUST DO A FULL REBUILD ANY ONE WITH SOME OVERSIZE PISTONS AND
BARRELS AVAILABLE FOR A GOOD PRICE.
viewtopic.php?f=72&t=33548
I'll list any new kits that come into stock.
Kind regards,
Nic
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
- Tony Z
- Donor
- Posts: 14994
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: bent fuel pump rod??have i @#$%@ up
I've got 90.5mm Mahle forged piston kit (incl cylinders) for R7200 or stock 85.5mm Mahle pistons and cylinders for R3150 excl courier charges
but I wont be able to supply before Xmas
Please update your profile to include your location.
but I wont be able to supply before Xmas
Please update your profile to include your location.
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
-
- Oil Stain
- Posts: 116
- Joined: Mon Aug 29, 2016 11:18 am
- What model do you have?: 69 vw beetle
- Location: port shepstone
- Has thanked: 1 time
- Been thanked: 5 times
Re: bent fuel pump rod??have i @#$%@ up
ok got all the pieces out someone who serviced her or whatever lost the washers under the dizzy drive
there where no washers
going to give her a good diesel bath and hope for the best
no need to split the motor.
bled the brakes tonight all's looking good will Post pics later
there where no washers
going to give her a good diesel bath and hope for the best
no need to split the motor.
bled the brakes tonight all's looking good will Post pics later