RSK 718 replica

Porsche and replica Porsche posts over here.
Post Reply
danielic
Drip
Posts: 18
Joined: Mon Jan 12, 2009 10:10 am
What model do you have?: 65 Karmann Ghia
Facebook: 0843074365
Location: southern suburbs, cape town
Has thanked: 10 times
Been thanked: 1 time
South Africa

RSK 718 replica

Post by danielic »

Hi guys.

I recently bought a Spyder RSK shell without the floorpan. Lucky, the seller also gave me the glass front screen with chrome trim as well.
I bought a 75 bug to use as a source for the floorpan and other bits and bobs.
I need to shorten the chassis so the shell can fit onto the floorpan but Im not sure by how much is should shorten it and where to make the cut.
I plan to cut the tunnel section in a 'Z' shape to maximise strength. Please advise me on the way forward to shorten the donor chassis.
The rear section is supposed to be hinged to a frame, Im just not sure how its done.
Any advice or comments is welcome and I would really want to get this project started.
Thank in advance. Will be posting pics soon


Ikies Candy Ghia
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Re: RSK 718 replica

Post by acpaterson »

Get in contact with Garth Waberski of Universal products. They make them and can tell you where, and how much to cut off the chassis.

regards

Alan
64 Notchback
Crankshaft
Posts: 767
Joined: Wed May 28, 2014 7:18 pm
What model do you have?: 69 Baja bug, Sand R
Location: JHB South
Has thanked: 78 times
Been thanked: 37 times
South Africa

Re: RSK 718 replica

Post by 64 Notchback »

From memory I think it is 381mm that needs to be removed.
when I was doing my RSK I hinged the rear section from the rear of the seat section, this is not the proper way I know but I felt it gave me easier access to the motor and gearbox, I then made "uprights" which I bolted to the axel tubes and spring plates to keep the rear in place.
unfortunately I don't have pics, but if you can find my build thread it may still be there.
danielic
Drip
Posts: 18
Joined: Mon Jan 12, 2009 10:10 am
What model do you have?: 65 Karmann Ghia
Facebook: 0843074365
Location: southern suburbs, cape town
Has thanked: 10 times
Been thanked: 1 time
South Africa

Re: RSK 718 replica

Post by danielic »

awesome guys...I thank you Alan and co
Much appreciated...I will do just that
Ikies Candy Ghia
User avatar
buggyfan
Long Block
Posts: 2979
Joined: Wed Mar 12, 2008 2:26 am
What model do you have?: lwb beachbuggy
Location: newlands,jhb
Has thanked: 95 times
Been thanked: 87 times
South Africa

Re: RSK 718 replica

Post by buggyfan »

64 Notchback wrote: Tue Nov 20, 2018 9:44 am From memory I think it is 381mm that needs to be removed.
when I was doing my RSK I hinged the rear section from the rear of the seat section, this is not the proper way I know but I felt it gave me easier access to the motor and gearbox, I then made "uprights" which I bolted to the axel tubes and spring plates to keep the rear in place.
unfortunately I don't have pics, but if you can find my build thread it may still be there.
viewtopic.php?f=23&t=32069#p292821
http://www.aircooledvwsa.co.za/viewtopi ... tt#p269451" onclick="window.open(this.href);return false;
danielic
Drip
Posts: 18
Joined: Mon Jan 12, 2009 10:10 am
What model do you have?: 65 Karmann Ghia
Facebook: 0843074365
Location: southern suburbs, cape town
Has thanked: 10 times
Been thanked: 1 time
South Africa

Re: RSK 718 replica

Post by danielic »

Hi guys.Just an update of the RSK build. The chassis was shortened and painted and all suspension parts were refurbished and brake lines and components renewed. Thereafter, the body was bolts to the chassis and properly sealed to ensure a waterproof fit. The steering wheel is a bit of a headache cos its position is limiting leg room and it interferes with the gear lever. Im thinking getting a 300mm steering wheel and a much shorter gear lever. Please advise me if thats wise or not. Seats is another headache cos no standard seat fits into the tiny space due to the fibreglass body encroaching into the seating space. Any ideas will be appreciated. I have two fibreglass speedboat seats which I can modify as well.
The gearbox is serviced and painted but still stock. I fitted a aircooled 1776cc turbo with a full custom exhaust system which extends from the engine back to the chassis up to the firewall where a 911 muffler deadens the noise and back down pass the gearbox under the right side head to exit the body at the rear. So its a very quiet car. Stock brakes at the moment but planning to fit discs upfront later. Rear clamshell body hinges from the middle of the car to ease accessiblity. I used aluminium window hinges to get this right. A rigid cage was built around the engine to protect against rear end collisions and the same to the front section beyond the tubular frame of the suspension torsion bar. Porsche replica alloy wheels all round with 195/55/15 at the back and 195/50/15 in front. Please feel free to comment or advise on any of the content of the feedback.
Ikies Candy Ghia
User avatar
retrovan
Donor
Donor
Posts: 8710
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 541 times
Contact:
Netherlands

Re: RSK 718 replica

Post by retrovan »

Please post a lot of photo's as we all love to see your nice ride.

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
Haans
Camshaft
Posts: 895
Joined: Wed Apr 20, 2016 7:10 pm
What model do you have?: 1960 ghia
Location: Nelson Mandela Metro
Has thanked: 1 time
Been thanked: 107 times
South Africa

Re: RSK 718 replica

Post by Haans »

Hi Danielic,...... Pic's pic's !!!!! these manne on this here forum is not very trusting........ only pic's tell the tale !!
and I want to see what you're doing,......I could learn a thing or two from you !
regards Haans
NineXi
Drip
Posts: 3
Joined: Mon Sep 10, 2018 9:01 pm
What model do you have?: RSK Spyder
Location: Cape Town
South Africa

Re: RSK 718 replica

Post by NineXi »

just FYI - I have posted similar for sale on Vehicles for sale forum
User avatar
retrovan
Donor
Donor
Posts: 8710
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 541 times
Contact:
Netherlands

Re: RSK 718 replica

Post by retrovan »

Are you selling it now, if so we need lots of details

And Photo's

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
User avatar
buggyfan
Long Block
Posts: 2979
Joined: Wed Mar 12, 2008 2:26 am
What model do you have?: lwb beachbuggy
Location: newlands,jhb
Has thanked: 95 times
Been thanked: 87 times
South Africa

Re: RSK 718 replica

Post by buggyfan »

retrovan wrote: Wed Nov 16, 2022 10:56 am Are you selling it now, if so we need lots of details

And Photo's

Herman
viewtopic.php?t=39938&sid=cd5f90b91daca ... a86c1d559d
http://www.aircooledvwsa.co.za/viewtopi ... tt#p269451" onclick="window.open(this.href);return false;
User avatar
retrovan
Donor
Donor
Posts: 8710
Joined: Mon Feb 07, 2011 8:51 pm
What model do you have?: 52T1,68FB,72Bay,75FL
Location: Eich! no, in Jefferys Bay
Has thanked: 421 times
Been thanked: 541 times
Contact:
Netherlands

Re: RSK 718 replica

Post by retrovan »

Thanks saw it after I posted

Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
Post Reply