's up?
1. I need a roofrack repaired PROPERLY. It needs very fine welding and needs to be smoothed afterwards...I don't want the welds seen.
2. I need someone to bend a small bar and rework it so that it can have a top screwed onto it, etc. to repair my wheelchair with.
Any suggestions?
Thanks, N.
Welding and custom metalwork...
- Merlin
- ACVWSA Junkie
- Posts: 6116
- Joined: Tue Sep 20, 2005 8:46 pm
- What model do you have?: Various
- Location: Cape Town, ZA
- Has thanked: 20 times
- Been thanked: 39 times
- Contact:
Welding and custom metalwork...
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
-
- Carburettor
- Posts: 1924
- Joined: Tue Aug 07, 2007 3:27 pm
- What model do you have?: ZILTCH
- Facebook: www.facebook.com/brandon.gilson
- Location: Port Elizabeth
- Merlin
- ACVWSA Junkie
- Posts: 6116
- Joined: Tue Sep 20, 2005 8:46 pm
- What model do you have?: Various
- Location: Cape Town, ZA
- Has thanked: 20 times
- Been thanked: 39 times
- Contact:
:s
Next time I'm out at the bee-baa, I'll take a pic of the wheelchair lock for you, and see how it gets removed...perhaps I can send it your way...it's not a very complex bit.
Probably about 15cm in length, with a 30' or so degree bend in it.
The top has a screw-on plastic cap, but I've forgotten what the bottom looks like...
It's one of the locks that holds the wheelchair to the floor rails.
Cheers, Nic.
Next time I'm out at the bee-baa, I'll take a pic of the wheelchair lock for you, and see how it gets removed...perhaps I can send it your way...it's not a very complex bit.
Probably about 15cm in length, with a 30' or so degree bend in it.
The top has a screw-on plastic cap, but I've forgotten what the bottom looks like...
It's one of the locks that holds the wheelchair to the floor rails.
Cheers, Nic.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
-
- Carburettor
- Posts: 1924
- Joined: Tue Aug 07, 2007 3:27 pm
- What model do you have?: ZILTCH
- Facebook: www.facebook.com/brandon.gilson
- Location: Port Elizabeth
- Merlin
- ACVWSA Junkie
- Posts: 6116
- Joined: Tue Sep 20, 2005 8:46 pm
- What model do you have?: Various
- Location: Cape Town, ZA
- Has thanked: 20 times
- Been thanked: 39 times
- Contact:
Shot Chris.
I think I've filled all my time slots after work and on weekends and my weekends until the end of the decade.
Crikey, I need a clone - or three.
Thanks for the offer. I'll definately take you up on it as soon as I get a chance.
Cheers, N.
I think I've filled all my time slots after work and on weekends and my weekends until the end of the decade.
Crikey, I need a clone - or three.
Thanks for the offer. I'll definately take you up on it as soon as I get a chance.
Cheers, N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.