Anyone? My dad's at Home, bored on his leave I presume, and wants to know the tappet settings for the '66...anyone?
Cheers, N.
1600 TP tappet settings?
-
Merlin
- ACVWSA Junkie
- Posts: 6124
- Joined: Tue Sep 20, 2005 8:46 pm
- What model do you have?: Various
- Location: Cape Town, ZA
- Has thanked: 20 times
- Been thanked: 39 times
- Contact:
1600 TP tappet settings?
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
-
fig
- Bus Driver
- Posts: 12214
- Joined: Fri Jan 20, 2006 10:08 pm
- What model do you have?: Type 2
- Facebook: https://www.facebook.com/groups/258896479219/
- Location: Where life is cheap and death is free
- Has thanked: 287 times
- Been thanked: 322 times
- Contact:
-
Tom Bishop
- Single Port
- Posts: 1205
- Joined: Thu Sep 07, 2006 5:04 pm
- What model do you have?: A Yellow 181
- Facebook: http://www.facebook.com/profile.php?id=1321084423
- Location: Cape Town
- Been thanked: 5 times
This is for all SA Beetles. Set on a cold motor.
1200 (51-65) In. 0.20mm Ex. 0.30mm
1300 (66-79) In. 0.15mm Ex. 0.15mm
1500 (67-70) In. 0.10mm Ex. 0.10mm
1600 (69-last SA) In 0.15mm Ex. 0.15mm
This was Factory Spec from Germany. As SA is a lot hotter you could comfortably get away with 0.10mm on you car.
Cheers
1200 (51-65) In. 0.20mm Ex. 0.30mm
1300 (66-79) In. 0.15mm Ex. 0.15mm
1500 (67-70) In. 0.10mm Ex. 0.10mm
1600 (69-last SA) In 0.15mm Ex. 0.15mm
This was Factory Spec from Germany. As SA is a lot hotter you could comfortably get away with 0.10mm on you car.
Cheers
”Experience is what you get when you do not get what you want”
