full window mod

Ask and give advice here
User avatar
beetle786
Camshaft
Posts: 831
Joined: Sun May 19, 2013 10:07 pm
What model do you have?: 1968 + 1303
Location: limpopo
Has thanked: 1 time
Been thanked: 8 times
Contact:

full window mod

Post by beetle786 »

Hi guys has anyone done a full window modification on a beetle and what parts were used eg.seals ,rubbers ,scrapers (inside and outside),window mechanism , where did you get the windows cut or made.
where where the parts sourced from aswell.
how much did it cost complete.
how much of time was taken to complete the project.

if anyone has done this mod please post some pic .
thanks to all. :idea:

:zhelp: :puterwork:
Click to View . Custom Graphics for your Beetle/Bus
4029
User avatar
buggyfan
Long Block
Posts: 2979
Joined: Wed Mar 12, 2008 2:26 am
What model do you have?: lwb beachbuggy
Location: newlands,jhb
Has thanked: 95 times
Been thanked: 87 times
South Africa

Re: full window mod

Post by buggyfan »

It looks nice for the first few days but once you start struggling with a window that keeps dropping forward you realise it was nt really worth it
http://www.aircooledvwsa.co.za/viewtopi ... tt#p269451" onclick="window.open(this.href);return false;
User avatar
Muderick
Donor
Donor
Posts: 2864
Joined: Tue Feb 19, 2008 2:40 pm
What model do you have?: 65T2 66T1 72T2 73T2
Location: Rondebosch East, Cape Town
Has thanked: 42 times
Been thanked: 69 times

Re: full window mod

Post by Muderick »

beetle786 wrote:Hi guys has anyone done a full window modification on a beetle and what parts were used eg.seals ,rubbers ,scrapers (inside and outside),window mechanism , where did you get the windows cut or made.
where where the parts sourced from aswell.
how much did it cost complete.
how much of time was taken to complete the project.

if anyone has done this mod please post some pic .
thanks to all. :idea:

:zhelp: :puterwork:
These were all the hype in the 80's and 90's, and should stay there. Never liked them, as some peeps would take short cuts and use single rails.... drive around, hit a bump and the window would drop down into a million pieces.... was fun seeing them try to remove all the glass from the beetles door afterwards... :hangloose:
Image

Old School or Bust!
User avatar
62vwbeetle
Oil Seal
Posts: 493
Joined: Tue Apr 15, 2008 9:48 pm
What model do you have?: 62,66,69
Location: JHB
Has thanked: 6 times
Been thanked: 12 times

Re: full window mod

Post by 62vwbeetle »

Dont do it, a full kit will cost about R2k but dont dont dont do it - done it 3 times and every time i say will buy all the best parts for the next one, bought all the best parts (some twice) on my grey 62 and with 20 20 hindsight - dont do it
69 Baja, 67 cal look, 62 sleeper, 59 ghia cab , 66 Ghia 69 912,single cab split
User avatar
Bratjie
Valve
Posts: 1039
Joined: Thu Dec 27, 2007 10:51 pm
What model do you have?: 74
Facebook: https://www.facebook.com/juan.buter
Location: Rietfontein, Pretoria ( Not Tshwane !!!)
Has thanked: 3 times
Been thanked: 5 times
South Africa

Re: full window mod

Post by Bratjie »

Did my modification about 10 years ago, still working well.
Esté robusto, ser fuerte!!!!

73 Beetle project
74 Beetle 2.1 WBX Turbo'ed & chargecooled
1959 Karmann Ghia Lefty, soon to be turbo'ed and chargecooled
User avatar
beetle786
Camshaft
Posts: 831
Joined: Sun May 19, 2013 10:07 pm
What model do you have?: 1968 + 1303
Location: limpopo
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: full window mod

Post by beetle786 »

can you send me some pics Bratjie
Click to View . Custom Graphics for your Beetle/Bus
4029
User avatar
Bratjie
Valve
Posts: 1039
Joined: Thu Dec 27, 2007 10:51 pm
What model do you have?: 74
Facebook: https://www.facebook.com/juan.buter
Location: Rietfontein, Pretoria ( Not Tshwane !!!)
Has thanked: 3 times
Been thanked: 5 times
South Africa

Re: full window mod

Post by Bratjie »

Will strip door panel over the weekend and take some pics of inside
Esté robusto, ser fuerte!!!!

73 Beetle project
74 Beetle 2.1 WBX Turbo'ed & chargecooled
1959 Karmann Ghia Lefty, soon to be turbo'ed and chargecooled
User avatar
vader
ACVWSA Junkie
Posts: 6465
Joined: Mon Sep 19, 2005 9:17 am
What model do you have?: TieFighter
Location: Help!I don't know where I am. Its dark & I can hear voices...
Has thanked: 9 times
Been thanked: 10 times

Re: full window mod

Post by vader »

It looks cool but appart form what everyone says the 3/4 vent is the best way to cool down the car in summer. I wish modern cars had this fitted.
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
calooker
Donor
Donor
Posts: 4973
Joined: Wed Sep 14, 2005 9:24 am
What model do you have?: 77 SP
Location: Johannesburg
Has thanked: 5 times
Been thanked: 98 times
Contact:
Portugal

Re: full window mod

Post by calooker »

vader wrote:It looks cool but appart form what everyone says the 3/4 vent is the best way to cool down the car in summer. I wish modern cars had this fitted.
Modern cars have AC.
On the one piece window thing, if you dont have window regulator mechanisms from a 66/67 (chicken teeth) beetle then you are going to be very disapointed. I have done it before and worked well with a set of 67 regulators until the driver side mechanism packed up, then fitted a 70's mechanism, just never worked right again, the glass is heavy towards the front & allways wound down with a rocking motion even with a felt channel fitted to support the front end of the glass. I retained the orifginal window scraper but sacraficed the lower rubber from another set to extend the area were the vent window was originaly, both inner & outer, these extender bits were glued in place, looked cool, but crap operation frustated me. The door stoppers were removed & replaced with a cable setup, if you leave the original ones in place & with the window rolled down & you open & close the door you are going to break the glass. The door was modified to take the 67 regulator and an extra support channel added on the inside to guide the sliding of the glass, quite a job to get it right.
For what it's worth, ignorance has no limits ......
User avatar
vader
ACVWSA Junkie
Posts: 6465
Joined: Mon Sep 19, 2005 9:17 am
What model do you have?: TieFighter
Location: Help!I don't know where I am. Its dark & I can hear voices...
Has thanked: 9 times
Been thanked: 10 times

Re: full window mod

Post by vader »

calooker wrote:
vader wrote:It looks cool but appart form what everyone says the 3/4 vent is the best way to cool down the car in summer. I wish modern cars had this fitted.
Modern cars have AC.
Ummm Not all modern cars have AC's & AC's do pack up. :flash:
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
User avatar
beetle786
Camshaft
Posts: 831
Joined: Sun May 19, 2013 10:07 pm
What model do you have?: 1968 + 1303
Location: limpopo
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: full window mod

Post by beetle786 »

mmmm does look quite cool though
Click to View . Custom Graphics for your Beetle/Bus
4029
User avatar
Klaus
Carburettor
Posts: 1951
Joined: Tue Jan 15, 2008 1:30 pm
What model do you have?: 68'Bug 69'Bus 75'SC
Location: JHB
Has thanked: 13 times
Been thanked: 11 times

Re: full window mod

Post by Klaus »

Bratjie wrote:Did my modification about 10 years ago, still working well.

+1

Did mine over 15yrs ago and never had a problem. Think it puts strain on the winder mech as every five years I replace that
Camping is cheaper than therapy.

"Wanna sell it" "Yeah, but there's a national shortage on 'for sale' signs."

PROUDLY KAAPSE KOMBI KULT FOLLOWER
User avatar
Bratjie
Valve
Posts: 1039
Joined: Thu Dec 27, 2007 10:51 pm
What model do you have?: 74
Facebook: https://www.facebook.com/juan.buter
Location: Rietfontein, Pretoria ( Not Tshwane !!!)
Has thanked: 3 times
Been thanked: 5 times
South Africa

Re: full window mod

Post by Bratjie »

Klaus wrote:
Bratjie wrote:Did my modification about 10 years ago, still working well.

+1

Did mine over 15yrs ago and never had a problem. Think it puts strain on the winder mech as every five years I replace that
I nrmally just lube the whole winder and worm with chain wax
Esté robusto, ser fuerte!!!!

73 Beetle project
74 Beetle 2.1 WBX Turbo'ed & chargecooled
1959 Karmann Ghia Lefty, soon to be turbo'ed and chargecooled
User avatar
Bratjie
Valve
Posts: 1039
Joined: Thu Dec 27, 2007 10:51 pm
What model do you have?: 74
Facebook: https://www.facebook.com/juan.buter
Location: Rietfontein, Pretoria ( Not Tshwane !!!)
Has thanked: 3 times
Been thanked: 5 times
South Africa

Re: full window mod

Post by Bratjie »

To me at a glance it just looks cooler in comparison to the original
1 piece window.jpg
You do not have the required permissions to view the files attached to this post.
Esté robusto, ser fuerte!!!!

73 Beetle project
74 Beetle 2.1 WBX Turbo'ed & chargecooled
1959 Karmann Ghia Lefty, soon to be turbo'ed and chargecooled
User avatar
vader
ACVWSA Junkie
Posts: 6465
Joined: Mon Sep 19, 2005 9:17 am
What model do you have?: TieFighter
Location: Help!I don't know where I am. Its dark & I can hear voices...
Has thanked: 9 times
Been thanked: 10 times

Re: full window mod

Post by vader »

Im not saying it doesnt look cool cause it does.
What Im saying is that it doesnt cool the cabin as well 1/4 vents...
TieFighter has single windows..
"My other ride is your SeatCover! & She loves it!"
Sometimes you'r the statue, sometimes your the pigeon.
"Only the dead go free..." Roger Waters.
"You do not understand the power of the DarkSide" Darth Vader.
Post Reply