Every project has a finite number of steps. If you do even one of those steps every day you will eventually run out of things to do; the project will be finished.
advice for those of you with slow moving projects
- Tony Z
- Donor
- Posts: 15008
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 488 times
advice for those of you with slow moving projects
Something I just read, which is perfectly true...
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- acpaterson
- Carburettor
- Posts: 1960
- Joined: Sat Jan 05, 2013 6:50 pm
- What model do you have?: Winston, a 74 Bay
- Location: Parklands, Cape Town
- Has thanked: 80 times
- Been thanked: 131 times
- Contact:
Re: advice for those of you with slow moving projects
Um, then you mis-interpret the word "project" in my opinion.
I WANT to reach the end of the project, it sometimes becomes a pain in the arse, but I don't give up half way through and then sell the project on gumtree in various boxes and half done.
If you're consistent, and do a little, every day, the project won't take you 10 years, it'll take 1 year.. but it WILL get completed.
Consistency, it's what matters.
I WANT to reach the end of the project, it sometimes becomes a pain in the arse, but I don't give up half way through and then sell the project on gumtree in various boxes and half done.
If you're consistent, and do a little, every day, the project won't take you 10 years, it'll take 1 year.. but it WILL get completed.
Consistency, it's what matters.

- retrovan
- Donor
- Posts: 8710
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 541 times
- Contact:
Re: advice for those of you with slow moving projects
My advise, never store a project till you have all the parts, as it will only land up on Gumtree.
No make it a moving project, in this way you will not loose interest, but have fun riding it as you improve it daily.
Herman
No make it a moving project, in this way you will not loose interest, but have fun riding it as you improve it daily.
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
- Donovan D
- Donor
- Posts: 2230
- Joined: Sun Jun 01, 2008 6:27 pm
- What model do you have?: 67 Panel
- Facebook: http://www.facebook.com/profile.php?id=536371512
- Location: Brackenfell
- Has thanked: 148 times
- Been thanked: 73 times
Re: advice for those of you with slow moving projects
Agreed, keeping it ticking over and doing small things helps keep the project going.
Even just cleaning parts makes a big difference as when the times comes to fit them, you know its ready to go on.
Even just cleaning parts makes a big difference as when the times comes to fit them, you know its ready to go on.
---------- 67 Panelvan -----------
---------- 56 Oval ----------
---------- 56 Oval ----------
-
- Crankshaft
- Posts: 767
- Joined: Wed May 28, 2014 7:18 pm
- What model do you have?: 69 Baja bug, Sand R
- Location: JHB South
- Has thanked: 78 times
- Been thanked: 37 times
Re: advice for those of you with slow moving projects
What I did on the spyder project is a plan of action/steps 1to ...........
And as I cannot do something every day I follow the next steps when I have the time.
As can be seen on my project thread I have only sprayed a layer of primer on the body reason being I wanted to make it "MY" project (every time I looked at it, it was the previous owners.
I am basically building it section by section and then stripping it again
I have collected a mass of parts for it and then I fit the parts and see which is the best/looks best/ nicest and then pack those chosen parts away (after cleaning them of course)
Just dont loose interest
And as I cannot do something every day I follow the next steps when I have the time.
As can be seen on my project thread I have only sprayed a layer of primer on the body reason being I wanted to make it "MY" project (every time I looked at it, it was the previous owners.
I am basically building it section by section and then stripping it again
I have collected a mass of parts for it and then I fit the parts and see which is the best/looks best/ nicest and then pack those chosen parts away (after cleaning them of course)
Just dont loose interest
- Cogita
- Oil Seal
- Posts: 415
- Joined: Wed Mar 21, 2012 10:11 pm
- What model do you have?: 63 Beetle
- Facebook: https://www.facebook.com/roscoe.jacobs
- Location: Cape Town
- Has thanked: 67 times
- Been thanked: 13 times
Re: advice for those of you with slow moving projects
When I got my project Karmann ghia I started with the following in this order:
-Motor
-Brakes
-Wiring
And in between I sourced the parts that I needed, but she was running exactly a month after I got it.
Still loads of work, but she's getting there.
-Motor
-Brakes
-Wiring
And in between I sourced the parts that I needed, but she was running exactly a month after I got it.
Still loads of work, but she's getting there.
You do not have the required permissions to view the files attached to this post.
- vwpumagt
- Oil Leak
- Posts: 87
- Joined: Fri Jun 22, 2012 11:16 pm
- What model do you have?: puma 74/81/85
- Location: cape town
- Has thanked: 6 times
- Been thanked: 4 times
Re: advice for those of you with slow moving projects
I ABSOLUTELY agree with Herman. It has worked for me. Not everyone has the same resources, cash, time , space, etc. and this can seriously hamper progress and cause one to loose interest. I have enjoyed my car for the passed couple of years and did the repairs, upgrades, experimenting etc whilst driving it. Because I make use of my rolling project all the time, when something needs doing or I want to fit something new, I complete it quickly so I can get back to the reason that I have it...to drive it and enjoy it.
- IMPI
- Donor
- Posts: 1897
- Joined: Wed Sep 14, 2005 9:01 pm
- What model do you have?: sp2
- Location: Orkney Northwest province
- Has thanked: 1 time
- Been thanked: 78 times
Re: advice for those of you with slow moving projects
For me the biggest rule is: Don't start another project while one is already going It is also a rule that I break often with disasterous results LOL
Armand
Armand

Who cares how it's done in California?

(018) 473-0186
- acpaterson
- Carburettor
- Posts: 1960
- Joined: Sat Jan 05, 2013 6:50 pm
- What model do you have?: Winston, a 74 Bay
- Location: Parklands, Cape Town
- Has thanked: 80 times
- Been thanked: 131 times
- Contact:
Re: advice for those of you with slow moving projects
This is also good advice.. trying to run MORE THAN ONE project at the same time, it's called "Multi_tasking", and it just cannot be done successfully. Forget it. Have a set of aims to reach, once they are accomplished, then either recalibrate the project, add new deadlines, or consider it as finished and leave as is.
(Is a VW EVER finished?)

(Is a VW EVER finished?)

- Wentzel
- Donor
- Posts: 983
- Joined: Thu Oct 11, 2007 12:10 pm
- What model do you have?: T1 1977,76
- Location: Witbank
- Has thanked: 6 times
- Been thanked: 13 times
Re: advice for those of you with slow moving projects
Sounds like some good advice. I will try to stick to some of it as I have one never ending project and now with the second project that is going very slowly I will try to do the small things and make it my own. The layer of primer sound like a good idea as I see the previous owners with the Lolette and I don't like what I see.
Thanks
Thanks
Oxyboxer Project
Never Ending Beetle Project viewtopic.php?f=23&t=35724
Lolette Spyder Project http://www.aircooledvwsa.co.za/viewtopi ... 23&t=32175
Never Ending Beetle Project viewtopic.php?f=23&t=35724
Lolette Spyder Project http://www.aircooledvwsa.co.za/viewtopi ... 23&t=32175