36 DCD, Wheel adaptors & T4 Engines

[Wentzel]

I'm selling off some parts I probably won't use.

36 DCD 7 with DIY manifold R1200. Carb barely used but needs a good cleaning.






Wheel Adaptors R600 for all or R200 per set of 2. 15" Shattara mags (VW Polo) also available that will fit 5 stud adaptors but will not fit on std beetle due to offset.



2L Type 4 with upright fibre glass housing with external oil cooler, pulley and alternator mounting. Housing needs some work to cool properly. I was still gathering parts for an upright conversion, engine was not run with the carbs or cooling setup yet. Offers for engine and or carbs. Flywheel was changed and I was told it will fit beetle gearbox.




2nd 2L Type 4 engine was bought and is still in my Lolette Spider complete with flat cooling, Std carbs, distributor and alternator. Exhaust was modified for kit car. R3500

http://www.aircooledvwsa.co.za/viewtopi ... 23&t=32175

Feel free to PM me with any questions.

[Piet]

Is the engine in your spyder in a running condition?

[Wentzel]

Hi I did not run the engine myself. I did remove plugs have a look at valve adjustment. Engine turns over and compression seems ok. If you or someone is intersted I will check what you want me to. You are welcome to inspect it and we can start it before removing it from the spider.

[Riekert]

What pcd are the adaptors?

[Wentzel]

The 2 on the right is 4 x 100 pcd. The 2 in the middle is 5 x 100 pcd (vw polo) and the left Might be 5 x 114.3 (toyota camry) but I dont know for sure.

[Duncanw]

Hi there. ....are the wheel adaptors still available. Please send me an sms on 0839762689. 5x100