103mm Deutz AC Cylinder Barrels SOLD

Get your parts here
Forum rules
Post only parts for sale here, no vehicles.
Post Reply
Darth
Drip
Posts: 33
Joined: Tue Sep 15, 2015 9:09 am
What model do you have?: One with wheels
Location: Raithby
Been thanked: 1 time
Contact:
Contact Darth

103mm Deutz AC Cylinder Barrels SOLD

Post by Darth »

I was keeping these for a MONSTER MOTOR but have decided to focus on one black-hole at a time. These are full SAMEl 20 sleeves never been remachined. As you can see they must still be cut down to the size of your desiered stroke. :jerkoff:

Or they make pretty cool retro door stops.. :flash:

R300 each or R1100 for the set.

If you come up with a really good Jannie Jammerball story we might neg.
IMG_2822b.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by Darth on Wed Oct 28, 2015 11:03 am, edited 1 time in total.
Do! Or Do Not! There is no Try! - Yoda

If I haven't offended you today yet, then wait you fcken turn I'm still getting to you.

Wake up each day to be a better you. Unless you are a DOOSE Don't be a better doose!
Top
Darth
Drip
Posts: 33
Joined: Tue Sep 15, 2015 9:09 am
What model do you have?: One with wheels
Location: Raithby
Been thanked: 1 time
Contact:
Contact Darth

Re: 103mm Deutz AC Cylinder Barrels

Post by Darth »

& if you are thinking you can bolt this onto your T1, think again. This is T4 only. The T1 just doesn't have enough meat between the barrels to safely go to 94mm without weakening the casing. The T4 case will accommodate the 107mm barrels. With some case clearance I think you can squeeze 82mm+ crankshaft inside. Taking you as close as Luke keeping his hand to the MAGICAL 3 000cc mark with treestump pulling Torque.Or you could just go with a shorter stroked crank giving you say 2.5l but that revs like a Stormtrooper with deli belly.
Do! Or Do Not! There is no Try! - Yoda

If I haven't offended you today yet, then wait you fcken turn I'm still getting to you.

Wake up each day to be a better you. Unless you are a DOOSE Don't be a better doose!
Top
Darth
Drip
Posts: 33
Joined: Tue Sep 15, 2015 9:09 am
What model do you have?: One with wheels
Location: Raithby
Been thanked: 1 time
Contact:
Contact Darth

Re: 103mm Deutz AC Cylinder Barrels SOLD

Post by Darth »

I know someone who is planning a Force to Destroy tires, twist side shafts, rip up tar & crush 200Kw! Either that or a set of retro door stops and matching paperweights.

I would love to see this one born....
Do! Or Do Not! There is no Try! - Yoda

If I haven't offended you today yet, then wait you fcken turn I'm still getting to you.

Wake up each day to be a better you. Unless you are a DOOSE Don't be a better doose!
Top
User avatar
Tony Z
Donor
Donor
Posts: 14992
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 488 times
South Africa

Re: 103mm Deutz AC Cylinder Barrels SOLD

Post by Tony Z »

Image
Top
JonnoDub
Oil Seal
Posts: 487
Joined: Mon Oct 17, 2011 3:55 pm
What model do you have?: '76 1600S
Facebook: http://www.facebook.com/jonnomans
Location: West Coast
Has thanked: 13 times
Been thanked: 9 times
South Africa

Re: 103mm Deutz AC Cylinder Barrels SOLD

Post by JonnoDub »

Tjop?
Keep on rolling baby , you know what time it is !
Top
Post Reply

Return to “Parts”