Refurbished EMPI 34mm EPC Carbs for sale. *SOLD*

Get your parts here
Forum rules
Post only parts for sale here, no vehicles.
Post Reply
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Refurbished EMPI 34mm EPC Carbs for sale. *SOLD*

Post by acpaterson »

Hi,

I am ordering some replacement jets for my Weber Carbs in the UK which replaced a pair EMPI EPC's I bought 6 months ago. They ran perfectly but then started leaking through the shafts.

* UPDATE * Saw Dave a FFR today, who says they shouldn't leak and the shafts are pretty good. problem is most likely flooding\needle and seat settings. So I've reset the needles and float height, and fitted new Jets including F67 emulsion tubes, 55 idles, 150 mains and 170 airs. Should be good to go.

Pics of the Carbs when I took them off my Bus.
Image

I want R 3 000-00 for them both. All you need is Manifolds and Filters and a Linkage system, I believe Dave has stock.

cheers

Alan
Last edited by acpaterson on Thu Aug 25, 2016 10:44 am, edited 2 times in total.
User avatar
Muderick
Donor
Donor
Posts: 2864
Joined: Tue Feb 19, 2008 2:40 pm
What model do you have?: 65T2 66T1 72T2 73T2
Location: Rondebosch East, Cape Town
Has thanked: 42 times
Been thanked: 69 times
South Africa

Re: Refurbished EMPI 34mm EPC Carbs for sale

Post by Muderick »

Hi Alan

You are spot on for those 34's. Just ensure that the kit has the correct needle valve size as below.

The 34 ICT was developed for single use on a Bedford vans in the UK, and all the carbs supplied are jetted for this, not for a VW beetle.
The jets as supplied are;
idle jet 52
main jet 130
air corrector jet 160
emulsion tube F78
needle valve 175

The recommended jets for a stock 1600 single/twin port are
idle jet 55
main jet 150
air corrector jet 170
emulsion tubes F3/F6
needle valve 125-140 * very important*

Muds
Image

Old School or Bust!
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Re: Refurbished EMPI 34mm EPC Carbs for sale

Post by acpaterson »

Hi Muds,
yes these carbs "can" be 100% perfect if a new owner wants them.. I need to get an offer to buy before I place orders for Service Kits and jets in the UK. I'll be bringing some Jets and stuff back form my own Webers, but if no one wants these, then I won't bother to refurb them, I'll just turf them onto a shelf as long term junk.

Al
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Re: Refurbished EMPI 34mm EPC Carbs for sale

Post by acpaterson »

PS. these are the same I bought from that pal of yours.. Once I had installed the correct jets, they were ROCK SOLID, until they started to leak on the shafts. So Will get Dave at FF to re-bush them if someone wants them, and then refit brand new Service kits and new jets.
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Re: Refurbished EMPI 34mm EPC Carbs for sale. *UPDATE*

Post by acpaterson »

* UPDATE *. Did an update to the original post. 3 K as is, ready to go with new Jets installed.
User avatar
acpaterson
Carburettor
Posts: 1960
Joined: Sat Jan 05, 2013 6:50 pm
What model do you have?: Winston, a 74 Bay
Location: Parklands, Cape Town
Has thanked: 80 times
Been thanked: 131 times
Contact:
South Africa

Re: Refurbished EMPI 34mm EPC Carbs for sale. *SOLD*

Post by acpaterson »

CARBS ARE SOLD.
Post Reply