'70 Westfalia Project
- sean
- Transmission
- Posts: 2400
- Joined: Sun Aug 03, 2008 8:51 pm
- What model do you have?: Bays & Splits
- Location: Somerset West
- Has thanked: 63 times
- Been thanked: 227 times
Re: '70 Westfalia Project
Wait, I think the "R10" is their bin location or something, the kit cost R415 Incl VAT each. I just got it at my local motor spares shop across the road. I am sure a bearing supplier should have access to this kit.
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
So I got the same kit from SKF (VKBA910). Before leaving I had a look and found that the seals and new circlips are all good, but the Outer bearing was incorrect. I could pop the whole bearing through the cup of the original. Will find out tomorrow why/what can be done.
Pity, thought I could assemble today but it was not to be.
Pity, thought I could assemble today but it was not to be.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
So I received a fitting bearing and the original wrong bearing back in the box.
So today was to be the fitting day, but alas, not to be. After cleaning and blasting and then painting I found the the part that hoses the bearings must have been in an accident. The ear with two tapped holes is bent and is 4mm from straight. Dunno how I missed it until now.
Anyone have any ideas if it can be fixed or anyone have a part like this lying around?
I have also bought another bus. a 2000L Executive. Engine runs but requires some attention rest is OK. Bus has been in an altercation on the laft side so the panels are not straight. I have two options with this one.
1. Use all the parts I can from this one to get the Westy fixed including the 2000 motor probably with gearbox if this fits.
2. Put it up for sale and rather look for a better donor match.
Anyone know if the hubs of the Westy will fit the stub axles of the 2000L?
Oh, and I fixed the clock on the Westy.
So today was to be the fitting day, but alas, not to be. After cleaning and blasting and then painting I found the the part that hoses the bearings must have been in an accident. The ear with two tapped holes is bent and is 4mm from straight. Dunno how I missed it until now.
Anyone have any ideas if it can be fixed or anyone have a part like this lying around?
I have also bought another bus. a 2000L Executive. Engine runs but requires some attention rest is OK. Bus has been in an altercation on the laft side so the panels are not straight. I have two options with this one.
1. Use all the parts I can from this one to get the Westy fixed including the 2000 motor probably with gearbox if this fits.
2. Put it up for sale and rather look for a better donor match.
Anyone know if the hubs of the Westy will fit the stub axles of the 2000L?
Oh, and I fixed the clock on the Westy.
You do not have the required permissions to view the files attached to this post.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
Whohoo, Bearing housing sorted. Now I can start assembling.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
The wheels are back on and also found a vacuum pipe torn which was causing brake booster not working and motor running very badly.
Brakes are redone and she stops well. I will now need to look at why the hooter is not working and then try to get the RWC.
Once done I can start stripping and fixing properly.
Brakes are redone and she stops well. I will now need to look at why the hooter is not working and then try to get the RWC.
Once done I can start stripping and fixing properly.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- retrovan
- Donor
- Posts: 8709
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 539 times
- Contact:
Re: '70 Westfalia Project
Well done, that looks a great buy,
Nice project and can be used wail you do it.
Herman
Nice project and can be used wail you do it.
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
Today I drove the Westy to have her chassis cleaned in preparation for roadworthy. All seems to go well although the starter has a funny sound after disengaging. Sounds like dry bendix bearing. Will need to look at that. But drove 100km today looking for a particular oil for another vehicle of mine. Quite enjoyed it.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
Took the Westy for a trial Roadworthy and it nearly passed. Brakes and all good but it failed on three items.
1 Number plated too faded (already got new ones)
2 Side window tint too dark (easy to remove)
3 Believe it or not wheel alignment
So need to do wheel alignment next week and then the Westy is good to go.
1 Number plated too faded (already got new ones)
2 Side window tint too dark (easy to remove)
3 Believe it or not wheel alignment
So need to do wheel alignment next week and then the Westy is good to go.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- Tony Z
- Donor
- Posts: 14996
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: '70 Westfalia Project
nice... nearly there.
Then you can pull it all apart again
Then you can pull it all apart again
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- fig
- Bus Driver
- Posts: 12214
- Joined: Fri Jan 20, 2006 10:08 pm
- What model do you have?: Type 2
- Facebook: https://www.facebook.com/groups/258896479219/
- Location: Where life is cheap and death is free
- Has thanked: 287 times
- Been thanked: 321 times
- Contact:
Re: '70 Westfalia Project
Good one Alan! Looks like you'll be ready for the KKKult kamp-out in February.
fig
Kaapse Kombi Kult
"Whether you think you can or whether you think you can't, you're right." -- Henry Ford
Kaapse Kombi Kult
"Whether you think you can or whether you think you can't, you're right." -- Henry Ford
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
Thanks guys,
Well hopefully, otherwise I could trailer her there.
Cannot wait to strip her down properly, that ratpiss smell is bad.
Well hopefully, otherwise I could trailer her there.
Cannot wait to strip her down properly, that ratpiss smell is bad.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
So now she is ready for RWC. Will only be able to go on Wednesday though.
New number plates are on, front window tint removed and wheel alignment done today.
After alignment she actually doesn't drive as nice as before. I thought she was perfectly aligned as she did not pull to any side. Anyway they adjusted the front saying the rear cannot be adjusted. I told them they are as I have read it in the manual. So now they want the specs and I can bring her back at no charge and they will adjust.
Anyone have the alignment specs for an Early Bay? Pllllleeeaaaassssee.
New number plates are on, front window tint removed and wheel alignment done today.
After alignment she actually doesn't drive as nice as before. I thought she was perfectly aligned as she did not pull to any side. Anyway they adjusted the front saying the rear cannot be adjusted. I told them they are as I have read it in the manual. So now they want the specs and I can bring her back at no charge and they will adjust.
Anyone have the alignment specs for an Early Bay? Pllllleeeaaaassssee.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
- retrovan
- Donor
- Posts: 8709
- Joined: Mon Feb 07, 2011 8:51 pm
- What model do you have?: 52T1,68FB,72Bay,75FL
- Location: Eich! no, in Jefferys Bay
- Has thanked: 421 times
- Been thanked: 539 times
- Contact:
Re: '70 Westfalia Project
Here you go, all you wanted to know, ........
http://automotiverepairguides.blogspot. ... wheel.html
http://www.thesamba.com/vw/forum/viewtopic.php?t=206764
Herman
http://automotiverepairguides.blogspot. ... wheel.html
http://www.thesamba.com/vw/forum/viewtopic.php?t=206764
Herman
1952 Split Beetle 1835cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
1968 Fastback 2Lt.type4
1972 Low Light Bay Panel Van 2Lt type 4
1975 Fleetline Panel Van 1914cc
2020 MeFusco Beetle Truck 2Lt type 4
1972 FT Hahn SP 1776 cc
- AlanH
- Crankshaft
- Posts: 733
- Joined: Thu Jan 17, 2013 7:20 am
- What model do you have?: '70 Westy
- Location: Pretoria
- Has thanked: 117 times
- Been thanked: 86 times
Re: '70 Westfalia Project
Fantastic, thanks. Actually forgot to look there.
Will print and take along.
Will print and take along.
Wanted parts:
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust
Left sunvisor
Sink faucet
Exhaust to swap for Beetle exhaust