Door removal

Ask and give advice here
Post Reply
Blitzkrieg
ACVWSA Junkie
Posts: 10784
Joined: Wed Mar 07, 2007 10:41 am
What model do you have?: none
Location: Johannesburg
Has thanked: 91 times
Been thanked: 44 times

Door removal

Post by Blitzkrieg »

Which is the best way to remove the doors?

1. Take of the entire hinge?(Near impossible on my car)

2. Knock out the pins?(How)
If it's too low, you're too old :twisted:
Top
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:
Contact Merlin

Post by Merlin »

I don't quite understand the pins comment...perhaps Type 3s are different to bugs and buses?

Get an impact driver and take out the two screws per hinge.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
Top
Blitzkrieg
ACVWSA Junkie
Posts: 10784
Joined: Wed Mar 07, 2007 10:41 am
What model do you have?: none
Location: Johannesburg
Has thanked: 91 times
Been thanked: 44 times

Post by Blitzkrieg »

*Adds Impact driver to shopping list*
If it's too low, you're too old :twisted:
Top
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:
Contact Merlin

Post by Merlin »

...don't skip on tools.

The best you can afford - and then some. ;)
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
Top
Post Reply

Return to “Advice”