Got any advice on...

Ask and give advice here
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Got any advice on...

Post by Merlin »

...replacing side mirrors?

At the moment my bug just has hinge pins in the doors, ie: no 'screw' on top for the mirrors...

I've got a set of hinge pins and mirrors to fit...

Who can give me some advice on how to remove the existing pins, and do any of you have the 'ream' tool or whatever it's called that I need to remove the existing pins?

Have you picked up on my lack of technical experience yet? ;)

...yes, I'm, learning - slowly.

Thanks, N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
hifibug57
Crankshaft
Posts: 732
Joined: Fri Nov 11, 2005 10:06 am
What model do you have?: jap-hybrid......
Location: deutschland
Been thanked: 1 time
Germany

Post by hifibug57 »

i tried unsuccessfully to remove the hingepin from my '57 queen mum'
gave up (after even the tungsten drillbit did not find bite) before i damaged something
resident VW exporter
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

I have no choice...I have to have mirrrors...this will shortly be my daily, and I need them for my RWC too. :/
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
User avatar
Tony Z
Donor
Donor
Posts: 15008
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 488 times
South Africa

Post by Tony Z »

Are you trying to keep the bug completely stock or not? If you are not, get decent set of mirrors and mount them to the door.

mine are drilled into the door, dont know if you can make them out or not....

Image
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

I had a set of Harley-Davidson mirrors for it - came with the car...

...but they're hideous.

I've sourced stock repros (pear-shaped) which I want to fit. They'll go with the car, which is not stock...

I want to fit those.

N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
calooker
Donor
Donor
Posts: 4973
Joined: Wed Sep 14, 2005 9:24 am
What model do you have?: 77 SP
Location: Johannesburg
Has thanked: 5 times
Been thanked: 98 times
Contact:
Portugal

Post by calooker »

Trust me I tied in vain to replace the pins on a ride I owned, I tried to fix a sagging door. I shat my pants doing it, I totally stuffed up the top hinge, never again, even Volkspares would not do it even if I payed them, landed up having to get a new door, not a home job.
For what it's worth, ignorance has no limits ......
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

:/

...this should be fun.

It's me - or the mirrors...

*Wild West OK Corral stance...*
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
User avatar
eben
Site Admin
Posts: 6449
Joined: Tue Sep 13, 2005 3:40 pm
What model do you have?: None
Facebook: www.facebook.com/ebenve
Location: Fintice, Slovakia
Has thanked: 91 times
Been thanked: 54 times
Contact:
Slovakia

Post by eben »

User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

;)
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

Any idea where I'd go to find someone with an impact hammer?

...it's not exactly something most people have lying around at Home, so I need to find an engineering shop or something...

PS: Getting a new set of headlights today... ;) ...can't wait. My bank balance can...
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
MELLO YELLOW
Valve
Posts: 1071
Joined: Thu Dec 15, 2005 10:14 am
What model do you have?: 71 Bug, 69 Westfalia
Location: Johannesburg
Has thanked: 1 time

Post by MELLO YELLOW »

Impact hammer or impct driver?
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

"Impact hammer" or "air chisel".

The photos show a compressed air 'gun'.

Quoting a few TS threads...

I have an impact driver. :)

I'd like to take my bug to a pro shop to get it done, but I have nFi who could do that sort of thing for me...
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

OK, after struggling, I took the bug to a trusted VW w/shop...

I've just had a call...

The doors have to come off, after which they will be knocking the Sh!t out of the hinge pins to try and get the pins out...

If it does not work, then they try heat the area up with a blowtorch, and if that fails, it's time to cut the hinges off.

Can you say cringe? :/

How is it that my doors never had hinge pins - on either side?

Perhaps they are later doors with the holes closed up?

They do have the correct '67-only handles...

Whatever happens, the area needs t be resprayed which is a pity, as it is wasted dosh.

I was going to respray the whole car next year, and this will take away from those forthcoming savings. :/

N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
User avatar
Tony Z
Donor
Donor
Posts: 15008
Joined: Wed Sep 14, 2005 8:33 am
What model do you have?: 2.3L 69; 1302; P/Van
Location: Klipheuwel (near Durbanville), Cape Town or working at sea
Has thanked: 192 times
Been thanked: 488 times
South Africa

Post by Tony Z »

all this for a set of mirrors.... Dude, sometimes plans have to change. ITs going to cost you, and you will probably have to replace a few things in the process, maybe the doors wont even fit after all the hacking they will do.
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:

Post by Merlin »

I don't really have a choice. I need mirrors, and the car needs a RWC urgently.

I did not want to drill holes into the doors, or fit floppys, etc.

N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
Post Reply