Page 1 of 1
full flow oiling diagram
Posted: Mon Jun 22, 2009 7:18 pm
by Edmond
Thought this might be useful
Re: full flow oiling diagram
Posted: Mon Jun 22, 2009 7:22 pm
by Tony Z
When doing this mod, dont forget to plug the pump and the case...
Also, make double sure you plumb in the filter properly. If I remember correctly, they flow against logic (mine anyway). The oil must flow from the outside of the filter to the centre.
Re: full flow oiling diagram
Posted: Mon Jun 22, 2009 8:27 pm
by BUGGOFF
Thanx for the pic edmond.
Hi tony, please explain what you mean with 'plug the pump and case'? Im still a appy. Thanx.
Re: full flow oiling diagram
Posted: Mon Jun 22, 2009 9:08 pm
by SFDT
This must get filed somewhere close.
Re: full flow oiling diagram
Posted: Mon Jun 22, 2009 11:08 pm
by dubster
Shot edmond...
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 7:58 am
by Tony Z
You take the oil out of the pump from a new opening. The stock opening needs to be closed (plugged). Then the oil line in the case, where the pump would normally pump into, that needs to be plugged too to prevent oil coming back from the main oil gallery and leaking slightly. Not entirely necessary to do both (my opinion) but it is better.
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 7:59 am
by Tony Z
I have a modified and plugged 30mm pump at home somewhere I can show you sometime if you want
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 8:01 am
by Ron&Gill
WHEN!!
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 8:40 am
by Tony Z
Ron&Gill wrote:WHEN!!
I am not as lucky as you (yet)
Mid August, will only be in town for 9 days tho
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 4:07 pm
by BUGGOFF
Ok, thanks tony, now im with you. That plate that covers the pump with the oil line opening; can i make one myself, or do i need to buy one?
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 6:21 pm
by Tony Z
With a milling machine you can make one youself... much easier and cheaper to buy one I think
Re: full flow oiling diagram
Posted: Tue Jun 23, 2009 7:37 pm
by Edmond
bugoff you can get a full flow oil pump cover from calooker(Rui) or Dave Rowley im sure volkspares also sells them