Detailed metalworker needed...

Ask and give advice here
Post Reply
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:
Contact Merlin

Detailed metalworker needed...

Post by Merlin »

's up?

I need someone who can do good, intricate welding in the Jo'burg area...

I need a r/rack with drill holes closed up NEATLY.

Another 'rack needs a beam replaced with a slight curvature, and both will need some slight straightening, sandblasting, and painting/chroming.

The one 'rack is powdercoated but needs the colour changed, either via removal, or over-spraying.

Any advice?

Cheers, N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
Top
calooker
Donor
Donor
Posts: 4973
Joined: Wed Sep 14, 2005 9:24 am
What model do you have?: 77 SP
Location: Johannesburg
Has thanked: 5 times
Been thanked: 98 times
Contact:
Contact calooker
Portugal

Post by calooker »

I would take the racks to City Powder Coaters they will sandblast all the old paint off and do a good coating job my rack cost me R80 last month.
Roy 083 701 4587 or 011 493 337
For what it's worth, ignorance has no limits ......
Top
User avatar
Merlin
ACVWSA Junkie
Posts: 6124
Joined: Tue Sep 20, 2005 8:46 pm
What model do you have?:  Various
Location: Cape Town, ZA
Has thanked: 20 times
Been thanked: 39 times
Contact:
Contact Merlin

Post by Merlin »

Thanks for the info Rui. I'll give 'em a try.

Any idea who could do the metalwork for me?

Cheers, N.
"Understeer is when you hit the wall with the front of the car, and oversteer, the rear.
Hp is how fast you hit the wall, and Torque is how far you take the wall with you."
sled wrote:well obviously the UK is wrong.
Top
Post Reply

Return to “Advice”