So...what are you doing on your car for 2012?

Post by **IMPI** » Tue Jan 31, 2012 9:08 pm

Hi Pulled that ford v6 from my westy today
I hope to have it aircooled again by Figs
Armand

dubster · Post by **dubster** » Thu Feb 09, 2012 10:08 am

put new rings in the 1717cc motor and home ported the heads aswell as fitting the centre mount weber downdruaght...now to get the buggy running as a reliable DD by the first half of the year and second half of the year is to start looking at turbo charging the motor and adding new mags and disk brakes ect.

Klaus · Post by **Klaus** » Thu Feb 09, 2012 10:21 am

Well so far from not needing to do anything I have done the following:

Lower the front end of the SC - strip cut weld refit
Alignment on the SC
New shocks on the SC

Start the process of recovering the westy interior in the bay.
Change the exhaust in the bay

Re-done the brakes on the rear of the mad car.

What a month

riaanj · Post by **riaanj** » Thu Feb 09, 2012 4:17 pm

My list for this year is long(well it is for me as I have no-where to work and little time to do it in)

1.Rear disk brake conversion
2.Cut out the handbrake section on my tunnel and replace with a non cancerous piece
3.Strip out front suspension and take it to Bugger to do proper lowering (then reinstall it)
4.Rewire the whole car
5.Get a rotary conversion done

This all needs to be done while keeping the car fairly driveable as I would like to attend some shows with it this year and after getting the cash together for the conversion. Then there's the little problem I have of not being able to weld, so I have to learn to weld with my newly(last year) bought TIG welder.

Klaus · Post by **Klaus** » Mon Feb 13, 2012 10:25 am

Changed out the new "exhaust" for the old one again.....

Fitted new belts to the SC
Fitted new light to the SC
Modified some of the westy interior for external use in the bay.
Mre interior recovering work

Went shopping for some bolts and came back with a fleety bumper, to be painted and mounted in the next few days......

Post by **calooker** » Mon Feb 13, 2012 11:45 am

Rat Notch halfway done, was hopping to have ir ready for Fig's but it won't be ready as some Fueling issues have put a spanner in the works, but watch this space.

MINCE · Post by **MINCE** » Mon Feb 13, 2012 11:53 am

Hoping to have my motor running within the next 30 days. that is of course Rui gets the parts to me before then. Any news calooker?

Dark Cloud · Post by **Dark Cloud** » Tue Mar 06, 2012 1:48 am

My plans for this year are as follows:

To get the car started before the 1st of May (would make a great birthday present)

Fix my indicator storks

To install an alarm with central locking in the car
Change the old worn out lock barrels for brand new lock barrels
Sort out the keys for my ride so that I can use one key to start, lock and unlock my car.
Fit Pioneer 6x9's

Fit a tracking device
Get the front lowered

Do a golf disk brake conversion
Buy new tail lights (going to do that first because the ones on it are broken)

Replace the seats with original vw beetle seats
Fit a MP3, USB, iPod headunit

Fit an aftermarket oil pump with bypass oil filter

Install a brand new engine hood latch with a lock
Replace the 4 into 1 exhaust with a new empi gt 2 tip premium exhaust
Buy new indicator lenses for the fender indicators
Fit new wiper blades
Fit new headlight bulbs, maybe some H4 units if possible. Give it that clear white look not that old and dull yellow look

Those are my plans for my '74 VW beetle, wish me luck guys, I'll need it.

flatfourfan · Post by **flatfourfan** » Tue Mar 06, 2012 8:58 am

To get my speedster 100% done......interior, exterior, trim and drivetrain......actually the target is June.

Aircooled VW South Africa