Is there an adapter (as a temporary fit) for a 5x205 to 4x100 conversion on a 1974 standard bug? Alternatively should we just modify the current hub and drums to accept the 4x100 PCD? If so, who in Cape Town does this?
We will switch to discs all 'round later (Rui) but for now an adapter or mod will do. Will be fitting 205/40x17's. I assume there will be slight clearance issues too?! This is all on a standard beam.
5x205 to 4x100 conversion
- Tony Z
- Donor
- Posts: 15006
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: 5x205 to 4x100 conversion
http://www.aircooledvwsa.co.za/viewtopi ... 72&t=28635
If you run a 35ET the rears will probably stick out slightly when using adapters. Fronts usually fit nicely
Say goodbye to your turning circle
If you run a 35ET the rears will probably stick out slightly when using adapters. Fronts usually fit nicely
Say goodbye to your turning circle
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- Stütz
- Donor
- Posts: 737
- Joined: Mon May 02, 2011 8:10 pm
- What model do you have?: 62, 64, 71, 71
- Location: Durbanville, Cape Town
- Has thanked: 18 times
- Been thanked: 19 times
Re: 5x205 to 4x100 conversion
Tony, I've read about the turning circle issue. Maybe a nice little Mendeola setup will fix that!
- Tony Z
- Donor
- Posts: 15006
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: 5x205 to 4x100 conversion
or we can start a new club... the 3-point turn club
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- Stütz
- Donor
- Posts: 737
- Joined: Mon May 02, 2011 8:10 pm
- What model do you have?: 62, 64, 71, 71
- Location: Durbanville, Cape Town
- Has thanked: 18 times
- Been thanked: 19 times
Re: 5x205 to 4x100 conversion
... 'at's a LOT cheaper than going Mendeola or Red9 fo sho!Tony Z wrote:or we can start a new club... the 3-point turn club
- beetle786
- Camshaft
- Posts: 831
- Joined: Sun May 19, 2013 10:07 pm
- What model do you have?: 1968 + 1303
- Location: limpopo
- Has thanked: 1 time
- Been thanked: 8 times
- Contact:
Re: 5x205 to 4x100 conversion
hi what setup s thisStütz wrote:Tony, I've read about the turning circle issue. Maybe a nice little Mendeola setup will fix that!
- Tony Z
- Donor
- Posts: 15006
- Joined: Wed Sep 14, 2005 8:33 am
- What model do you have?: 2.3L 69; 1302; P/Van
- Location: Klipheuwel (near Durbanville), Cape Town or working at sea
- Has thanked: 192 times
- Been thanked: 487 times
Re: 5x205 to 4x100 conversion
fully independant and adjustable A-arm suspension
Only R50k once you land it in SA. R35k if you walk into the shop
Only R50k once you land it in SA. R35k if you walk into the shop
ANGRRR
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=14775
1302S
http://www.aircooledvwsa.co.za/viewtopi ... 23&t=33521
Panel Van
http://www.aircooledvwsa.co.za/viewtopic.php?p=288723
vader wrote: The Force is strong with you young Sith Lord Z!
- beetle786
- Camshaft
- Posts: 831
- Joined: Sun May 19, 2013 10:07 pm
- What model do you have?: 1968 + 1303
- Location: limpopo
- Has thanked: 1 time
- Been thanked: 8 times
- Contact:
Re: 5x205 to 4x100 conversion
we got to start the 3 point turn club soooonTony Z wrote:fully independant and adjustable A-arm suspension
Only R50k once you land it in SA. R35k if you walk into the shop
- Stütz
- Donor
- Posts: 737
- Joined: Mon May 02, 2011 8:10 pm
- What model do you have?: 62, 64, 71, 71
- Location: Durbanville, Cape Town
- Has thanked: 18 times
- Been thanked: 19 times