king pins-link pins
Forum rules
If its not ACVW related, post it in Off Topic.
If its not ACVW related, post it in Off Topic.
-
Skymac
- Crankshaft
- Posts: 733
- Joined: Tue Sep 08, 2009 3:26 pm
- What model do you have?: Bay window
- Location: Pretoria
- Contact:
king pins-link pins
where is the best place in pretoria or jhb to have this done?
Once a fanatic, always a fanatic-
Sambabus
- Short Block
- Posts: 2648
- Joined: Fri Aug 15, 2008 10:42 am
- What model do you have?: Classic campers
- Location: East Rand.
- Has thanked: 39 times
- Been thanked: 14 times
Re: king pins-link pins
Prestech engineering say thet could remanufacture out of stainless steel no problem,they just need the original i would imagine....thier based in Boksburg,
"ALL THAT LIVES IS BORNE TO DIE........NOTHING REALLY MATTERS." Robert Plant-Led Zeppelin.
"Crime is still goverments priority." SA Police spokesperson
RESPECT,EVERYONE SEEMS TO BE LOSING IT!!!
"Crime is still goverments priority." SA Police spokesperson
RESPECT,EVERYONE SEEMS TO BE LOSING IT!!!
-
Pine
- ACVWSA Junkie
- Posts: 15036
- Joined: Sun Sep 18, 2005 5:54 pm
- What model do you have?: Oil on the driveway
- Location: Wilderness
- Has thanked: 235 times
- Been thanked: 234 times
- Contact:
Re: king pins-link pins
Werner Alke from the Jacaranda Beetle Club - he did mine on HW2, and you have seen it.
You get a LOT of credit if you bring him your front beam already clean and disassembled
(012) 654 8272
You get a LOT of credit if you bring him your front beam already clean and disassembled
(012) 654 8272-
zubz
- Valve
- Posts: 1080
- Joined: Wed Apr 01, 2009 10:03 am
- What model do you have?: 62 LHD Rag, 69 Auto
- Location: Johannesburg
Re: king pins-link pins
Werner was supposed to have made me an A Frame, somehow he lost interest as he is too busy but damn this guy is good...I am going to call him to see if he would make it....Pine wrote:Werner Alke from the Jacaranda Beetle Club - he did mine on HW2, and you have seen it.
You get a LOT of credit if you bring him your front beam already clean and disassembled
-
Pine
- ACVWSA Junkie
- Posts: 15036
- Joined: Sun Sep 18, 2005 5:54 pm
- What model do you have?: Oil on the driveway
- Location: Wilderness
- Has thanked: 235 times
- Been thanked: 234 times
- Contact:
Re: king pins-link pins
If you look at the pic below, the king pin is the shaft that runs vertically, and on which the stub axles steer (ie turn), the link pins are the horisontal axles (two per side, removed in the pic) on which your suspension travels up and down:zubz wrote:btw guys, what is king pins/link pins?
-
zubz
- Valve
- Posts: 1080
- Joined: Wed Apr 01, 2009 10:03 am
- What model do you have?: 62 LHD Rag, 69 Auto
- Location: Johannesburg
Re: king pins-link pins
Dankie...Pine wrote:If you look at the pic below, the king pin is the shaft that runs vertically, and on which the stub axles steer (ie turn), the link pins are the horisontal axles (two per side, removed in the pic) on which your suspension travels up and down:zubz wrote:btw guys, what is king pins/link pins?
-
Dawie
- Fuel Injection
- Posts: 2115
- Joined: Sat Sep 30, 2006 10:25 pm
- What model do you have?: Aircooled, various
- Location: Kaapstadt
- Has thanked: 45 times
- Been thanked: 208 times
Re: king pins-link pins
Thanks Pine for the pictures. Those look like split kombi type,with needle bearings for the linkpins.
Beetle types do not have needle bearings at the linkpins.
Remember, it is VERY important to grease the front suspension at least every 5000 km. Every oil change service should include greasing the front suspension, as was recommended by VW.
Beetle types do not have needle bearings at the linkpins.
Remember, it is VERY important to grease the front suspension at least every 5000 km. Every oil change service should include greasing the front suspension, as was recommended by VW.
Staying Aircooled is so much nicer.
Do'nt assume anything- (While doing fault-finding).
Do'nt assume anything- (While doing fault-finding).
-
Pine
- ACVWSA Junkie
- Posts: 15036
- Joined: Sun Sep 18, 2005 5:54 pm
- What model do you have?: Oil on the driveway
- Location: Wilderness
- Has thanked: 235 times
- Been thanked: 234 times
- Contact:
Re: king pins-link pins
Thanks Dawie, it was just a generic pic I got from TheSamba. Needle bearings on the link pins sounds like a good idea, wonder why they discontinued it?
-
calooker
- Donor
- Posts: 4973
- Joined: Wed Sep 14, 2005 9:24 am
- What model do you have?: 77 SP
- Location: Johannesburg
- Has thanked: 5 times
- Been thanked: 98 times
- Contact:
Re: king pins-link pins
If anyone needs a good quality Brasil set for beetle, I got R500.
Rui 082 830 6493
Rui 082 830 6493
For what it's worth, ignorance has no limits ......